Hello Mike, LF, I'm waiting from ferrites and litz wire to arrive from eBay, then I will be able to start my experiments for a wideband ferrite-cored antenna covering as much as possible of LF. Major
Hello Stefan, Do you think the aluminium could be the problem or the distance between the coil and the core? I could replace the aluminium tube with a plastic tube, if shielding is not necessary, but
IQ2MI/B started test transmissions @501.300 KHz from Milan (Italy) with 20mW ERP. Reception reports can be sent to [email protected]. Best regards Daniele
Hello LF, may be of interest for some LF listener to know about a beacon on 136 kHz that has been recently activated by IZ1TJM, Carlo Maglietti. QTH location is Diano Marina, Italy, JN43BW. Tx mode i
Hello Daniele, some months ago I made a broadbanded ferriterod to cope with heavy qrm on the 80 and 160m band.The ferite comes from a submarine and is specified 10KHz to 4 MHZ with a symmetrical fee
Hello LF, looking at this very interesting graph: http://df3lp.de/misc/hga22/ my understanding is that summer nights - though shorter than winter ones - could be better for reception of LF signals in
PS: For a 50 Ohm output, just 2 or 3 turns on the out-coupling winding was the best choice for my ferrite antenna. Am 28.06.2012 16:54, schrieb Stefan Schäfer: Hi Daniele. If your RX is successful e
Of course all those who like yahoo have no problem to take part in the poll. But there may be some who say "i won't bother with this yahoo stuff". Those will have no real chance to take part. Based
