Re: LF: RE: G3KEV

["mal hamilton" <g3kevmal@talktalk.net>]

james

Mine is a mk1 and output is 0 dbM but antenna is 1/4 wave inv L which helps’'

This is a temp setup until I get an interface built to conn to the MF amp

I cannot hear your signal at my QTH

73 de mal/g3kev

 

 

From: James Cowburn

Sent: Saturday, November 28, 2015 12:42 PM

To: rsgb_lf_group@blacksheep.org

Subject: LF: RE: G3KEV

 

Hi all

 

I too use a 706mk2g and it works FB on 472.  I can get a good 10/15W out of the PA so prob about 10mw into the ether.

 

WSPR DX ~ 1000km to DE/FR/IT so well happy and v simple set up

 

Dell XPS17  - G4ZLP interface – WSPR2.1  - IC706mk2G  - home brew lpf – 20m coax to inverted L 10m/30m with tapped loading coil wound on 4.5” brown plastic pipe.

 

Works fine for local CW net on Sunday morning covering IO92 and Chas G3DZX also.

 

KISS

 

 

Jim G7NKS

 

---

From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of DK7FC
Sent: 27 November 2015 16:05
To: rsgb_lf_group@blacksheep.org
Subject: LF: G3KEV

 

Mal,

I just found:

3 spots:

Timestamp	Call	MHz	SNR	Drift	Grid	Pwr	Reporter	RGrid	km	az
2015-11-27 15:52	G3KEV	0.475702	-29	0	IO94sh	5	M0LMH	IO93gx	75	241
2015-11-27 15:44	G3KEV	0.475702	-27	0	IO94sh	5	M0LMH	IO93gx	75	241
2015-11-27 14:44	G3KEV	0.475692	-28	0	IO94sh	5	M0LMH	IO93gx	75	241

My congratulations! So now how do you generate that signal? A Raspi? That could explain the SNR. I guess you will add some 10 dB soon? :-)
Tell us!

73, Stefan