Thank's John, Ahh -3db splitter .. so that makes my 1 Watt Tx , now 500mW carrier feed to the Ae ! which with a good following breeze is round 1 mW erp ... ! Monitor: GM4SLV Loc IP90GG Frequency: 0.5
Date: Tue, 30 Aug 2011 21:32:17 +0000 (GMT Standard Time)
LF, Graham, Gary I've moved back to WSPR for the overnight session, but have hooked up another RX fed via the Ae C/O splitter arrangement so I'll leave it monitoring ROS too... There'll be some clash
Date: Wed, 31 Aug 2011 05:39:56 +0000 (GMT Standard Time)
G It was already being split with a 3dB splitter (one feed to the grabber RX and another to the main RX). Now there's a 2nd splitter, so the main RX is getting -6dB wrt the antenna signal. This makes
Yes ..looks like in still have some RX problems .. no decode of Finbar ..has to be noise , all the Rx's cannot be wrong . G. From: [email protected] Gary - G4WGT Sent: Thursday, September 01, 2011
You have just verified what I have always said. Yes keep an open mind and experiment but in the end all will come to the same conclusion as Yourself. QRSS/DFCW. Over the years I have had a multitude
Scott I will give it some thought. I have worked VE7 es W6/W7 es KL7 stations on 160metres CW over the years during the winter months. so like you say it is likely that it can be done on 500 and poss
Thanks John - good to talk again - Well never say never - SM6BHZ has made it on WSPR a few times on 500 so you never know. Thanks also to Graham with the help of the set up. Im running a test up on 1
Laurence, LF, ROS is NOT the mode for this sort of test! I came to the shack at 05:15 UTC to find the regular beaconing had stopped running. Apparently if a signal is received the software stops any
KL7UK now ROS 500kHz for the night - Laurence From: [email protected] To: [email protected] Date: Thu, 1 Sep 2011 13:56:06 -0800 Subject: RE: LF: ros Thanks John - good to tal
Graham I do not have the software to decode only watching the traces. de mal/g3kev -- Original Message -- From: [email protected] Graham To: [email protected] rsgb_lf_group@blacks
MF My first encounter with ROS !! After installation it seemed to run well but no signals for some time although I could both see them and hear some of them on the waterfall. I only got one good lin
Ok Mal well thats the down load link, un-zip into a directory , say , C:\ROS , then run the install exe , set up is the same as speclab etc , just select the sound card - no need to have the pc-clock
Winds blowing the right way , at -33 thats in the bargain basement hi G.. Monitor: TF3HZ/QRP Loc HP94AD Frequency: 0.500 MHz (unknown) Using: ROS v6.6.8+CAT/Rptr V1.4 Antenna: ROS1_100__~33dB Show al
I understand, but I was not. Considering the volume of signals visible at my QTH, but I did copy one complete line from the GM station, who was probably the weakest, also as pointed out I kept gett
I am not transmitting only RX but keep getting spots on 14 es 18 Mhz although I have selected 500 Kcs Got the waterfall but no sigs so far what is the freq. I was watching traces before on speclab
MAL Take the digital dip hihi , >> http://rosmodem.wordpress.com/ << see what you decode over there , be interesting to see what happens with a good Ae ? At the moment EI0CF , GM4SLV , G4WGT , G0NBD
Graham In my case ROS freeze, ceased to function, otherwise all other PC functions normal de mal/g3kev -- Original Message -- From: [email protected] Graham To: [email protected] rsg
Laurence, LF, ROS is NOT the mode for this sort of test! I came to the shack at 05:15 UTC to find the regular beaconing had stopped running. Apparently if a signal is received the software stops any
Dial is set at 500/usb and waterfall shows good sigs but no decode The via internet info about other bands, I do not need that mal -- Original Message -- From: [email protected] Gary - G4WGT To: rs
Yes ..looks like in still have some RX problems .. no decode of Finbar ..has to be noise , all the Rx's cannot be wrong . G. From: [email protected] Gary - G4WGT Sent: Thurs