Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: ros

To: <[email protected]>
Subject: Re: LF: ros
From: "Graham" <[email protected]>
Date: Thu, 1 Sep 2011 22:42:03 +0100
Importance: Normal
In-reply-to: <alpine.WNT.2.00.1109012106370.3960@opc1>
References: <004301cc68dc$3ee79540$0401a8c0@xphd97xgq27nyf>,<4EEE84D5F0DF43BE878C6B3E1E455554@AGB>,<005301cc68de$4c864c80$0401a8c0@xphd97xgq27nyf>,<CAJStiw5hLOsng48zySb1e+Gaqnr+1ce3w2n=SZaANKcOco-usw@mail.gmail.com>,<3C0C61D0515A436CB88A0DB5AFDD9CA9@AGB>,<CAJStiw4EZoiYXVdVgPn3J=9vxQ2fcff-uXY48yAp6sagiEhL2g@mail.gmail.com>,<001101cc68e5$974df590$0401a8c0@xphd97xgq27nyf>,<CAJStiw7NXwN6aE01_GcrQNHQ9MjxiEjB49FAx6_dHJQuBWQzYA@mail.gmail.com>,<CAJStiw7V2KaPY8FPJN-GzqZOwOLttkqvcK1nVzA+sLRsP7OefA@mail.gmail.com> <[email protected]> <alpine.WNT.2.00.1109012106370.3960@opc1>
Reply-to: [email protected]
Sender: [email protected]

Winds blowing the right way , at -33 thats in the bargain basement hi

G..

Monitor: TF3HZ/QRP Loc HP94AD
Frequency: 0.500 MHz (unknown)
Using: ROS v6.6.8+CAT/Rptr V1.4
Antenna: ROS1_100__~33dB
Show all seen by TF3HZ/QRP
Last report: GM4SL

--------------------------------------------------
From: "John P-G" <[email protected]>
Sent: Thursday, September 01, 2011 10:09 PM
To: <[email protected]>
Subject: RE: LF: ros




On Thu, 1 Sep 2011, Laurence KL7UK wrote:

Im going to take it ROS defaults are what Im to use symbol rate etc....


Laurence, LF,

As long as you select Band = 500kHz and Symbol Rate for RX at "7-2" it
should take care of itself. If you select RX symbol Rate 2 you'll miss out
on any stronger, faster 7-baud signals (and vice versa), the 7-2 setting
auto-switches, depending on what it hears.

Good luck - I'll keep a beacon TX running after I go to bed. Don't hold
out much hope of reception though!

John
GM4SLV
Shetland






<Prev in Thread] Current Thread [Next in Thread>