|
Dial is set at 500/usb and waterfall shows good sigs but
no decode
The via internet info about other bands, I do not need
that
mal
----- Original Message -----
Sent: Thursday, September 01, 2011 9:49
PM
Subject: Re: LF: ros
Mal,
The spots are via internet.
You need set rig for dial freq 500kHz which gives Tx freq
501.500kHz.
Gary - G4WGT.
On 1 September 2011 21:27, mal hamilton <[email protected]>
wrote:
I am not transmitting only RX but keep getting spots
on 14 es 18 Mhz although I have selected 500 Kcs
Got the waterfall but no sigs so far
what is the freq. I was watching
traces before on speclab on 501.5
mal
----- Original Message -----
Sent: Thursday, September 01, 2011
9:17 PM
Subject: Re: LF: ros
Graham, Mal,
Just noticed Mal's ID on the ROS display but no signal.
Gary - G4WGT.
On 1 September 2011 21:04, Graham <[email protected]> wrote:
Yes ..looks like in still
have some RX problems .. no decode
of Finbar ..has to be noise ,
all the Rx's cannot be wrong
.
G.
Sent: Thursday, September 01, 2011 8:47 PM
Subject: Re: LF: ros
Mal,
I have just had a 2 way QSO with Finbar EI0CF using ROS.
Graham has given you the link for the software, give it a
try.
73
Gary - G4WGT.
On 1 September 2011 20:35, mal hamilton <[email protected]> wrote:
Graham
I do not have the software to decode only
watching the traces.
de mal/g3kev
----- Original Message -----
Sent: Thursday, September 01,
2011 8:26 PM
Subject: Re: LF: ros
MAL
see what you
decode over there , be interesting to see
what happens with a good Ae ?
At the moment
EI0CF , GM4SLV , G4WGT , G0NBD ,
G..
Sent: Thursday, September 01, 2011 8:20 PM
Subject: LF: ros
MF
Two stns active 501.5 One vy loud, other weak.
Looking only at trace
g3kev
|
