Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: TXing 2200m WSPR

To: [email protected]
Subject: Re: LF: TXing 2200m WSPR
From: DK7FC <[email protected]>
Date: Sat, 23 Dec 2017 16:35:57 +0100
Dkim-signature: v=1; a=rsa-sha256; c=relaxed/simple; d=posteo.de; s=2017; t=1514043358; bh=QhyBnhERVFIs07+VipW/8YnfWMDnWbDCPlaLv2ulCrs=; h=Date:From:To:Subject:From; b=RHfB54/7C4YEJeOPlC5J2QGyDFFtEdDbVbgcDAoM2pTsVOgcEAFhypYH1popBBGPc rVMSrdc8HQRIj9451dizynTUyNeGJErZw7sX32BmhrKDkQxoiTtAGUpPX3W1BxR6s6 9yD4lR53ZuAnMRIjpT1miFu3fACgIOZ6yaDcymACjWeT0jYTtEoW3klkylErVmbMzZ V0tZhn9lMHtuWPybjJH2M27C50Ic5D4u8P59Mc8skYpRJVCeKkbJ5DhkD3n6M1USVc ntzkyA29tTwFdvfHe8AI3h6bGFf9lpocR26j2GQRhE+vRmfx+ZRDu5DtUR/WD4qA0q pwnGrgPLRqhAA==
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
Hi Paul,

So at least there is an improvement.
Does the blue core become warm during operation?
How does the drain-voltage look like?

73, Stefan

Am 23.12.2017 14:13, schrieb N1BUG:
Hi Stefan,

The C on the gate is not a good idea i think. Better try a 10...22 Ohm
resitor or a ferrite bead in front of the gate.

I removed the C on the gate and added a 15 ohm resistor in front of the gate (in series with RF input to the gate). No change in performance.

Is the bias voltage stable? It may be worth to spend 1000 uF parallel to
the Z diode. And a normal diode in front of the z diode, i.e. into the
yellow wire...

I didn't have any 1000 uF but I put 470 uF in parallel to the Z diode, added a 1N4007 in series at the end of the yellow wire. No change in performance.

At this point I became curious about the 1 uF C bypassing the +V lead of the blue core to ground. It seemed strange to have it bypassed with 1 uF there, then a series choke, then 2200 uF bypass. I could not find any published circuits like that.

As a test (not having any idea what I was doing!) I removed the 1 uF bypass. The amp went completely crazy.

So I decided to try some more C in parallel to the 1 uF. All I have are electrolytic caps, but I tried 10 uF. Stable output increased from 12W to 16W.

What about even more C? I removed the 10 uF and put 100 uF in parallel to the 1 uF. No change from the 10 uF.

It still does very strange things if I try to adjust bias for more than 16W.

I don't know what this experiment tells me...

The blue core, maybe it saturates at higher power? Could be worth to try
2 more turns and better use abt 0.5 mm wire for higher power.

I will try that next if I find some suitable wire here. I also thought about trying a 10 turn bifilar winding instead of the trifilar. Again I have no idea what I am doing, but the worst that can happen is another dead FET. :) I have more.

But the design is not good for > 30 W or so. Don't expect to much from
an IRF530 at 13.8 V.

I would be happy if I could get 25W stable from this amp. I can get 25W but it is not stable at that level.

73,
Paul N1BUG


<Prev in Thread] Current Thread [Next in Thread>