Laurence,
Unsurprisingly, nothing seen (from anywhere) on 137k WSPR15 last
night. However, I am a great believer in "never say never" and have
worked some great DX (on other bands) when some others wouldn't even
have tried.
regards
Mike
=====
> thanks Mike - over the pole doesn't look too bright at the moment
> http://kl7l.com/LF00000.jpg but never say never - had that nice late
> opening on 137 to JA today so worth the meter spin. JA was also loud
> on circa 970kHz on the drive into work this morning knocking out the
> "local" 1kHz co-channel from Fairbanks..
>
> 73
> Laurence KL7L et al
>
> > From: [email protected]
> > To: [email protected]
> > Date: Wed, 3 Feb 2016 18:59:44 +0000
> > Subject: Re: LF: MF: WSPR-15 this night
> >
> > I will be monitoring for you on 137kHz.
> >
> > Mike, G3XDV
> > ==========
> >
> > > Morning all - I was (am on) 475.811 but it looks like its a little
> > > congested in Eu so for tonight transmission ill be down at 475.803
> > > with parallel transmissions on 137 starting around 01Z - peak to
> > > mid Eu on 137 is occurring around 03-04Z at the moment. Todays
> > > transmission will stop here at 16Z close to my dawn
> > >
> > >
> > > 73
> > >
> > > Laurence KL7 L WE2XPQ
> > > Wasilla Palmer Alaska
> > >
> > > > Date: Wed, 3 Feb 2016 09:53:51 +0100
> > > > From: [email protected]
> > > > To: [email protected]
> > > > CC: [email protected]
> > > > Subject: Re: LF: MF: WSPR-15 this night
> > > >
> > > > Hello Tobias and all the other RXer,
> > > >
> > > > thank you for the flowers! There was a second station DJ6LB with
> > > > vy little output. @ 475.813 recieved by DF6NM.
> > > >
> > > > I'm trying WSPR-15 with my second U3S -without OCXO- right
> > > > now...
> > > >
> > > >
> > > > 73 de Vinny, DL6II
> > > >
> > > >
> > > >
> > > > Am 03.02.2016 08:48, schrieb Tobias DG3LV:
> > > > > Hi Vinny, MF !
> > > > >
> > > > > Good job ! Your signal was ok and loud last night. Congrats !
> > > > >
> > > > > There could have been an additional WSPR-15 station on 475.807
> > > > > at 22:00h to 22:30h, but it was too weak to be decoded at my
> > > > > side.(see picture) No one else was listed for a decode, so who
> > > > > was it ?
> > > > >
> > > > > Anyone on this reflector ?
> > > > >
> > > > > 73 de dg3lv Tobias
> > > > >
> > > > > Am 02.02.2016 um 20:17 schrieb Vincent Stallbaum:
> > > > >> OK, I had some time for doing a few tests in the afternoon.
> > > > >> No chance for WSPR-15 & my transverter so far.
> > > > >>
> > > > >> But I just got my first 15-spot by G6AVK running the
> > > > >> Ultimate3S barefoot!
> > > > >>
> > > > >> To be continued...
> > > > >>
> > > > >> 73 Vinny, DL6II
> > > > >>
> > > > >>
> > > > >>
> > > > >> Am 02.02.2016 11:16, schrieb Vincent Stallbaum:
> > > > >>> Hello Andy,
> > > > >>>
> > > > >>> I'm already using a TCXO. But as we have seen the
> > > > >>> construction isn't well isolated. The big fan is blowing it
> > > > >>> out of frequency hi hi!
> > > > >>>
> > > > >>> One of my Ultimate3S has an oven inside as well, so let's
> > > > >>> see which heater does the better job.
> > > > >>>
> > > > >>> Maybe it would be a good idea to heat the transverter up by
> > > > >>> txing CW for 5 minutes :)
> > > > >>>
> > > > >>> 73
> > > > >>> Vinny
> > > > >>>
> > > > >>>
> > > > >>> Am 02.02.2016 10:22, schrieb F6CNI - Andy - JN19QB:
> > > > >>>> OK Vinny.
> > > > >>>> About stability, here I use an home made transverter for
> > > > >>>> transmiting. I had same problem using a classic Xtal
> > > > >>>> oscillator. After I changed it by a TCXO, and now the
> > > > >>>> stability is good. 73 de Andy. *From:* Vincent Stallbaum
> > > > >>>> <mailto:[email protected]> *Sent:* Tuesday, February 2, 2016
> > > > >>>> 5:30 AM *To:* [email protected]
> > > > >>>> <mailto:[email protected]> *Subject:* AW: Re:
> > > > >>>> LF: MF: WSPR-15 this night Hey all, thank you all for your
> > > > >>>> reports. It seems the big fan is a bit too big. And the
> > > > >>>> transverter too close to the pa. I just stopped the fan,
> > > > >>>> let's see if it's starts smelling hi hi. Otherwise I'll try
> > > > >>>> it agn with my Ultimate3S. 73 Vinny
> > > > >>>>
> > > > >>>>
> > > > >>>> -------- Ursprüngliche Nachricht --------
> > > > >>>> Von: Tobias DG3LV <[email protected]>
> > > > >>>> Datum: 01.02.2016 22:40 (GMT+01:00)
> > > > >>>> An: [email protected]
> > > > >>>> Betreff: Re: LF: MF: WSPR-15 this night
> > > > >>>>
> > > > >>>> Hi Vinny !
> > > > >>>>
> > > > >>>> There was a signal at 475.802, the level was ok, but it had
> > > > >>>> a drift of 3 Hertz coming from 475.799. This is way too
> > > > >>>> much for a successful decode of WSPR-15. If it was your
> > > > >>>> signal, you have to work on frequency stability first.
> > > > >>>>
> > > > >>>> 73 de dg3lv Tobias
> > > > >>>>
> > > > >>>> Am 01.02.2016 um 15:04 schrieb Vincent Stallbaum:
> > > > >>>> > Hello MF,
> > > > >>>> >
> > > > >>>> > I'm going for WSPR-15 this night. TX will be between
> > > > >>>> > 22.15h to
> > > > >>>> 8.15h UTC.
> > > > >>>> >
> > > > >>>> > I hope there'll be some takers for my signals!
> > > > >>>> >
> > > > >>>> > vy73 de DL6II, Vinny
> > > > >>>> >
> > > > >>>> >
> > > > >>>
> > > > >>
> > > >
> > > >
> > >
> > >
> > >
> > > -----
> > > No virus found in this message.
> > > Checked by AVG - www.avg.com
> > > Version: 2016.0.7357 / Virus Database: 4522/11547 - Release Date:
> > > 02/03/16
> > >
> >
> >
> >
>
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2016.0.7357 / Virus Database: 4522/11547 - Release Date:
> 02/03/16
>
|
