RE: LF: MF: WSPR-15 this night

[Laurence KL7 L <hellozerohellozero@hotmail.com>]

thanks Mike - over the pole doesn't look too bright at the moment  http://kl7l.com/LF00000.jpg  but never say never - had that nice late opening on 137 to JA today so
worth the meter spin. JA was also loud on circa 970kHz on the drive into work this morning knocking out the "local" 1kHz co-channel from Fairbanks..
 
73 
Laurence KL7L et al
 

> From: mike.dennison@ntlworld.com
> To: rsgb_lf_group@blacksheep.org
> Date: Wed, 3 Feb 2016 18:59:44 +0000
> Subject: Re: LF: MF: WSPR-15 this night
>
> I will be monitoring for you on 137kHz.
>
> Mike, G3XDV
> ==========
>
> > Morning all - I was (am on) 475.811 but it looks like its a little
> > congested in Eu so for tonight transmission ill be down at 475.803
> > with parallel transmissions on 137 starting around 01Z - peak to mid
> > Eu on 137 is occurring around 03-04Z at the moment. Todays
> > transmission will stop here at 16Z close to my dawn
> >
> >
> > 73
> >
> > Laurence KL7 L WE2XPQ
> > Wasilla Palmer Alaska
> >
> > > Date: Wed, 3 Feb 2016 09:53:51 +0100
> > > From: info@vsas.de
> > > To: rsgb_lf_group@blacksheep.org
> > > CC: DG3LV@gmx.net
> > > Subject: Re: LF: MF: WSPR-15 this night
> > >
> > > Hello Tobias and all the other RXer,
> > >
> > > thank you for the flowers! There was a second station DJ6LB with vy
> > > little output. @ 475.813 recieved by DF6NM.
> > >
> > > I'm trying WSPR-15 with my second U3S -without OCXO- right now...
> > >
> > >
> > > 73 de Vinny, DL6II
> > >
> > >
> > >
> > > Am 03.02.2016 08:48, schrieb Tobias DG3LV:
> > > > Hi Vinny, MF !
> > > >
> > > > Good job ! Your signal was ok and loud last night. Congrats !
> > > >
> > > > There could have been an additional WSPR-15 station on 475.807 at
> > > > 22:00h to 22:30h, but it was too weak to be decoded at my
> > > > side.(see picture) No one else was listed for a decode, so who was
> > > > it ?
> > > >
> > > > Anyone on this reflector ?
> > > >
> > > > 73 de dg3lv Tobias
> > > >
> > > > Am 02.02.2016 um 20:17 schrieb Vincent Stallbaum:
> > > >> OK, I had some time for doing a few tests in the afternoon. No
> > > >> chance for WSPR-15 & my transverter so far.
> > > >>
> > > >> But I just got my first 15-spot by G6AVK running the Ultimate3S
> > > >> barefoot!
> > > >>
> > > >> To be continued...
> > > >>
> > > >> 73 Vinny, DL6II
> > > >>
> > > >>
> > > >>
> > > >> Am 02.02.2016 11:16, schrieb Vincent Stallbaum:
> > > >>> Hello Andy,
> > > >>>
> > > >>> I'm already using a TCXO. But as we have seen the construction
> > > >>> isn't well isolated. The big fan is blowing it out of frequency
> > > >>> hi hi!
> > > >>>
> > > >>> One of my Ultimate3S has an oven inside as well, so let's see
> > > >>> which heater does the better job.
> > > >>>
> > > >>> Maybe it would be a good idea to heat the transverter up by
> > > >>> txing CW for 5 minutes :)
> > > >>>
> > > >>> 73
> > > >>> Vinny
> > > >>>
> > > >>>
> > > >>> Am 02.02.2016 10:22, schrieb F6CNI - Andy - JN19QB:
> > > >>>> OK Vinny.
> > > >>>> About stability, here I use an home made transverter for
> > > >>>> transmiting. I had same problem using a classic Xtal
> > > >>>> oscillator. After I changed it by a TCXO, and now the stability
> > > >>>> is good. 73 de Andy. *From:* Vincent Stallbaum
> > > >>>> <mailto:info@vsas.de> *Sent:* Tuesday, February 2, 2016 5:30 AM
> > > >>>> *To:* rsgb_lf_group@blacksheep.org
> > > >>>> <mailto:rsgb_lf_group@blacksheep.org> *Subject:* AW: Re: LF:
> > > >>>> MF: WSPR-15 this night Hey all, thank you all for your reports.
> > > >>>> It seems the big fan is a bit too big. And the transverter too
> > > >>>> close to the pa. I just stopped the fan, let's see if it's
> > > >>>> starts smelling hi hi. Otherwise I'll try it agn with my
> > > >>>> Ultimate3S. 73 Vinny
> > > >>>>
> > > >>>>
> > > >>>> -------- Ursprüngliche Nachricht --------
> > > >>>> Von: Tobias DG3LV <DG3LV@gmx.net>
> > > >>>> Datum: 01.02.2016 22:40 (GMT+01:00)
> > > >>>> An: rsgb_lf_group@blacksheep.org
> > > >>>> Betreff: Re: LF: MF: WSPR-15 this night
> > > >>>>
> > > >>>> Hi Vinny !
> > > >>>>
> > > >>>> There was a signal at 475.802, the level was ok, but it had a
> > > >>>> drift of 3 Hertz coming from 475.799. This is way too much for
> > > >>>> a successful decode of WSPR-15. If it was your signal, you have
> > > >>>> to work on frequency stability first.
> > > >>>>
> > > >>>> 73 de dg3lv Tobias
> > > >>>>
> > > >>>> Am 01.02.2016 um 15:04 schrieb Vincent Stallbaum:
> > > >>>> > Hello MF,
> > > >>>> >
> > > >>>> > I'm going for WSPR-15 this night. TX will be between 22.15h
> > > >>>> > to
> > > >>>> 8.15h UTC.
> > > >>>> >
> > > >>>> > I hope there'll be some takers for my signals!
> > > >>>> >
> > > >>>> > vy73 de DL6II, Vinny
> > > >>>> >
> > > >>>> >
> > > >>>
> > > >>
> > >
> > >
> >
> >
> >
> > -----
> > No virus found in this message.
> > Checked by AVG - www.avg.com
> > Version: 2016.0.7357 / Virus Database: 4522/11547 - Release Date:
> > 02/03/16
> >
>
>
>