> Date: Wed, 3 Feb 2016 09:53:51 +0100
> From: [email protected]
> To: [email protected]
> CC: [email protected]
> Subject: Re: LF: MF: WSPR-15 this night
>
> Hello Tobias and all the other RXer,
>
> thank you for the flowers! There was a second station DJ6LB with vy
> little output. @ 475.813 recieved by DF6NM.
>
> I'm trying WSPR-15 with my second U3S -without OCXO- right now...
>
>
> 73 de Vinny, DL6II
>
>
>
> Am 03.02.2016 08:48, schrieb Tobias DG3LV:
> > Hi Vinny, MF !
> >
> > Good job ! Your signal was ok and loud last night. Congrats !
> >
> > There could have been an additional WSPR-15 station on 475.807 at
> > 22:00h to 22:30h, but it was too weak to be decoded at my side.(see
> > picture) No one else was listed for a decode, so who was it ?
> >
> > Anyone on this reflector ?
> >
> > 73 de dg3lv Tobias
> >
> > Am 02.02.2016 um 20:17 schrieb Vincent Stallbaum:
> >> OK, I had some time for doing a few tests in the afternoon. No chance
> >> for WSPR-15 & my transverter so far.
> >>
> >> But I just got my first 15-spot by G6AVK running the Ultimate3S
> >> barefoot!
> >>
> >> To be continued...
> >>
> >> 73 Vinny, DL6II
> >>
> >>
> >>
> >> Am 02.02.2016 11:16, schrieb Vincent Stallbaum:
> >>> Hello Andy,
> >>>
> >>> I'm already using a TCXO. But as we have seen the construction isn't
> >>> well isolated. The big fan is blowing it out of frequency hi hi!
> >>>
> >>> One of my Ultimate3S has an oven inside as well, so let's see which
> >>> heater does the better job.
> >>>
> >>> Maybe it would be a good idea to heat the transverter up by txing CW
> >>> for 5 minutes :)
> >>>
> >>> 73
> >>> Vinny
> >>>
> >>>
> >>> Am 02.02.2016 10:22, schrieb F6CNI - Andy - JN19QB:
> >>>> OK Vinny.
> >>>> About stability, here I use an home made transverter for transmiting.
> >>>> I had same problem using a classic Xtal oscillator.
> >>>> After I changed it by a TCXO, and now the stability is good.
> >>>> 73 de Andy.
> >>>> *From:* Vincent Stallbaum <mailto:[email protected]>
> >>>> *Sent:* Tuesday, February 2, 2016 5:30 AM
> >>>> *To:* [email protected]
> >>>> <mailto:[email protected]>
> >>>> *Subject:* AW: Re: LF: MF: WSPR-15 this night
> >>>> Hey all,
> >>>> thank you all for your reports. It seems the big fan is a bit too
> >>>> big. And the transverter too close to the pa. I just stopped the fan,
> >>>> let's see if it's starts smelling hi hi. Otherwise I'll try it agn
> >>>> with my Ultimate3S.
> >>>> 73
> >>>> Vinny
> >>>>
> >>>>
> >>>> -------- Ursprüngliche Nachricht --------
> >>>> Von: Tobias DG3LV <[email protected]>
> >>>> Datum: 01.02.2016 22:40 (GMT+01:00)
> >>>> An: [email protected]
> >>>> Betreff: Re: LF: MF: WSPR-15 this night
> >>>>
> >>>> Hi Vinny !
> >>>>
> >>>> There was a signal at 475.802, the level was ok, but it had a drift
> >>>> of 3
> >>>> Hertz coming from 475.799. This is way too much for a successful
> >>>> decode
> >>>> of WSPR-15. If it was your signal, you have to work on frequency
> >>>> stability first.
> >>>>
> >>>> 73 de dg3lv Tobias
> >>>>
> >>>> Am 01.02.2016 um 15:04 schrieb Vincent Stallbaum:
> >>>> > Hello MF,
> >>>> >
> >>>> > I'm going for WSPR-15 this night. TX will be between 22.15h to
> >>>> 8.15h UTC.
> >>>> >
> >>>> > I hope there'll be some takers for my signals!
> >>>> >
> >>>> > vy73 de DL6II, Vinny
> >>>> >
> >>>> >
> >>>
> >>
>
>