Thanks Mike we had some success both on 137 and 475 to JA at 0245 and 0215z 
respectively - over the pole was not so hot and I just was playing at the not 
so lossy edge of the Auroral oval last night

Cheers

Laurence KL7L WE2XPQ

> On Feb 4, 2016, at 1:07 AM, Mike Dennison <[email protected]> wrote:
> 
> Laurence,
> 
> Unsurprisingly, nothing seen (from anywhere) on 137k WSPR15 last 
> night. However, I am a great believer in "never say never" and have 
> worked some great DX (on other bands) when some others wouldn't even 
> have tried. 
> 
> regards
> Mike
> =====
> 
>> thanks Mike - over the pole doesn't look too bright at the moment 
>> http://kl7l.com/LF00000.jpg  but never say never - had that nice late
>> opening on 137 to JA today so worth the meter spin. JA was also loud
>> on circa 970kHz on the drive into work this morning knocking out the
>> "local" 1kHz co-channel from Fairbanks..
>> 
>> 73 
>> Laurence KL7L et al
>> 
>>> From: [email protected]
>>> To: [email protected]
>>> Date: Wed, 3 Feb 2016 18:59:44 +0000
>>> Subject: Re: LF: MF: WSPR-15 this night
>>> 
>>> I will be monitoring for you on 137kHz.
>>> 
>>> Mike, G3XDV
>>> ==========
>>> 
>>>> Morning all - I was (am on) 475.811 but it looks like its a little
>>>> congested in Eu so for tonight transmission ill be down at 475.803
>>>> with parallel transmissions on 137 starting around 01Z - peak to
>>>> mid Eu on 137 is occurring around 03-04Z at the moment. Todays
>>>> transmission will stop here at 16Z close to my dawn
>>>> 
>>>> 
>>>> 73
>>>> 
>>>> Laurence KL7 L  WE2XPQ
>>>> Wasilla Palmer Alaska
>>>> 
>>>>> Date: Wed, 3 Feb 2016 09:53:51 +0100
>>>>> From: [email protected]
>>>>> To: [email protected]
>>>>> CC: [email protected]
>>>>> Subject: Re: LF: MF: WSPR-15 this night
>>>>> 
>>>>> Hello Tobias and all the other RXer,
>>>>> 
>>>>> thank you for the flowers! There was a second station DJ6LB with
>>>>> vy little output. @ 475.813 recieved by DF6NM.
>>>>> 
>>>>> I'm trying WSPR-15 with my second U3S -without OCXO- right
>>>>> now...
>>>>> 
>>>>> 
>>>>> 73 de Vinny, DL6II
>>>>> 
>>>>> 
>>>>> 
>>>>> Am 03.02.2016 08:48, schrieb Tobias DG3LV:
>>>>>> Hi Vinny, MF !
>>>>>> 
>>>>>> Good job ! Your signal was ok and loud last night. Congrats !
>>>>>> 
>>>>>> There could have been an additional WSPR-15 station on 475.807
>>>>>> at 22:00h to 22:30h, but it was too weak to be decoded at my
>>>>>> side.(see picture) No one else was listed for a decode, so who
>>>>>> was it ?
>>>>>> 
>>>>>> Anyone on this reflector ?
>>>>>> 
>>>>>> 73 de dg3lv Tobias
>>>>>> 
>>>>>>> Am 02.02.2016 um 20:17 schrieb Vincent Stallbaum:
>>>>>>> OK, I had some time for doing a few tests in the afternoon.
>>>>>>> No chance for WSPR-15 & my transverter so far.
>>>>>>> 
>>>>>>> But I just got my first 15-spot by G6AVK running the
>>>>>>> Ultimate3S barefoot!
>>>>>>> 
>>>>>>> To be continued...
>>>>>>> 
>>>>>>> 73 Vinny, DL6II
>>>>>>> 
>>>>>>> 
>>>>>>> 
>>>>>>> Am 02.02.2016 11:16, schrieb Vincent Stallbaum:
>>>>>>>> Hello Andy,
>>>>>>>> 
>>>>>>>> I'm already using a TCXO. But as we have seen the
>>>>>>>> construction isn't well isolated. The big fan is blowing it
>>>>>>>> out of frequency hi hi!
>>>>>>>> 
>>>>>>>> One of my Ultimate3S has an oven inside as well, so let's
>>>>>>>> see which heater does the better job.
>>>>>>>> 
>>>>>>>> Maybe it would be a good idea to heat the transverter up by
>>>>>>>> txing CW for 5 minutes :)
>>>>>>>> 
>>>>>>>> 73
>>>>>>>> Vinny
>>>>>>>> 
>>>>>>>> 
>>>>>>>> Am 02.02.2016 10:22, schrieb F6CNI - Andy - JN19QB:
>>>>>>>>> OK Vinny.
>>>>>>>>> About stability, here I use an home made transverter for
>>>>>>>>> transmiting. I had same problem using a classic Xtal
>>>>>>>>> oscillator. After I changed it by a TCXO, and now the
>>>>>>>>> stability is good. 73 de Andy. *From:* Vincent Stallbaum
>>>>>>>>> <mailto:[email protected]> *Sent:* Tuesday, February 2, 2016
>>>>>>>>> 5:30 AM *To:* [email protected]
>>>>>>>>> <mailto:[email protected]> *Subject:* AW: Re:
>>>>>>>>> LF: MF: WSPR-15 this night Hey all, thank you all for your
>>>>>>>>> reports. It seems the big fan is a bit too big. And the
>>>>>>>>> transverter too close to the pa. I just stopped the fan,
>>>>>>>>> let's see if it's starts smelling hi hi. Otherwise I'll try
>>>>>>>>> it agn with my Ultimate3S. 73 Vinny
>>>>>>>>> 
>>>>>>>>> 
>>>>>>>>> -------- Ursprüngliche Nachricht --------
>>>>>>>>> Von: Tobias DG3LV <[email protected]>
>>>>>>>>> Datum: 01.02.2016 22:40 (GMT+01:00)
>>>>>>>>> An: [email protected]
>>>>>>>>> Betreff: Re: LF: MF: WSPR-15 this night
>>>>>>>>> 
>>>>>>>>> Hi Vinny !
>>>>>>>>> 
>>>>>>>>> There was a signal at 475.802, the level was ok, but it had
>>>>>>>>> a drift of 3 Hertz coming from 475.799. This is way too
>>>>>>>>> much for a successful decode of WSPR-15. If it was your
>>>>>>>>> signal, you have to work on frequency stability first.
>>>>>>>>> 
>>>>>>>>> 73 de dg3lv Tobias
>>>>>>>>> 
>>>>>>>>>> Am 01.02.2016 um 15:04 schrieb Vincent Stallbaum:
>>>>>>>>>> Hello MF,
>>>>>>>>>> 
>>>>>>>>>> I'm going for WSPR-15 this night. TX will be between
>>>>>>>>>> 22.15h to
>>>>>>>>> 8.15h UTC.
>>>>>>>>>> 
>>>>>>>>>> I hope there'll be some takers for my signals!
>>>>>>>>>> 
>>>>>>>>>> vy73 de DL6II, Vinny
>>>> 
>>>> 
>>>> 
>>>> -----
>>>> No virus found in this message.
>>>> Checked by AVG - www.avg.com
>>>> Version: 2016.0.7357 / Virus Database: 4522/11547 - Release Date:
>>>> 02/03/16
>> 
>> 
>> 
>> -----
>> No virus found in this message.
>> Checked by AVG - www.avg.com
>> Version: 2016.0.7357 / Virus Database: 4522/11547 - Release Date:
>> 02/03/16
> 
> 
>