Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

RE: LF: U3S on JT-9

To: "[email protected]" <[email protected]>
Subject: RE: LF: U3S on JT-9
From: VIGILANT Luis Fernández <[email protected]>
Date: Thu, 4 Feb 2016 09:14:48 +0000
Accept-language: es-ES, en-US
In-reply-to: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: AQHRXxrGFmBfha12VESgyu/JOIxfgp8bmRWg
Thread-topic: LF: U3S on JT-9
Hi Steve, Vinny
 
I'm also using U3 as MF exciter. Thought about using it on JT9 as I have a U3S also (JT9 only supported in U3S not U3)
But, as Vinny reports, it would be a nightmare to struggle with menus to change the message :(
 
An U3S with UART and some commands (CAT command based maybe) would be nice. But obviously a different beast
Probably the U3S Arduino shield is the way to go for such a thing
 
73 de Luis 
EA5DOM

De: [email protected] [mailto:[email protected]] En nombre de Vincent Stallbaum
Enviado el: jueves, 04 de febrero de 2016 8:02
Para: [email protected]
Asunto: AW: LF: U3S on JT-9

Hello Steve,

I have tried to use mine for a driver during OZ0IL activity. RX was a funcube pro +.

The generated signal is ufb. I got many decodes. 

But changing the messages in 10 seconds after RX decode is nearly impossible because of the menue handling. Especially entering the partners callsign takes too long.

So best solution would be to use two U3S to prepare the next message on the second one. It's worth money.

vy73 de Vinny, DL6II


-------- Ursprüngliche Nachricht --------
Von: Steve <[email protected]>
Datum: 04.02.2016 01:27 (GMT+01:00)
An: [email protected]
Betreff: LF: U3S on JT-9

Have any of you been using this for JT-9 QSO work on 630m, either by itself
or for a driver?


Steve




WEB - "The VE7SL Radio Notebook":  http://members.shaw.ca/ve7sl

VE7SL BLOG - "Homebrewing and Operating Adventures From 2200m to Nanowaves":
http://ve7sl.blogspot.ca/


<Prev in Thread] Current Thread [Next in Thread>