Thanks for the report Laurence, nice work! That's what i meant before some weeks. There could be significant differences between DHO and SAQ and even more to the Dreamers Band / 8970 Hz. I think the
Yes the correlation of DHO to 9kHz is much less than I would have wanted :-) but as you say this is what experimentation is all about - Im still hypothesizing that pre dawn Eu will still return the b
SAQ was very weak into Alaska during a PCA event on the 5th Aug - many dBs down from the 3rd July and some 30+dB from the Winter broadcasts. I wasnt able to decode any of the morse (signal at or way
SAQ was received in Alaska this morning but the signal to noise wasnt very good with relatively high levels of QRN at the 1030Z start time, peaking about 5dB above noise. Tuning period was quite shor
Hello all, today reception of SAQ with an old rig Icom IC-745 (RAM unit modified for 10 kHz / 30 MHz coverage) antenna was the Miniwhip. F4DTL Nicolas JN18FP
Hi Laurence , LF SAQ not running now ! 73 Jean-Pierre f1afj Le 24/12/2011 09:09, Laurence KL7UK a écrit : Not seeing SAQ here in Alaska at 0800z - Laurence
Dear Dick, during the time when DF3LP in Kiel had been active on LF and also copied SAQ he had written on this server that SAQ sounded "like a flute". This would mean that when receiving SAQ with suf
Hi Dave, Yes you are right, I was using a program to decode the CW, although I can now manage to read by ear up to about 20 wpm on a good day. Regular listening on LF has improved my CW enormously af
From Dave G3YMC SAQ on 17.2kHz copied 589 both sessions on my 'bit of string' untuned longwire. Solid copy despite intermittent elecrical QRN at a similar strength (thermostat or similar). However th
Dr. OM, In an one-turn untuned screened loop with an area of 1 square metre SAQ produced an EMF of 0.206 microvolt. That corresponds to a field strength of 572 microvolt/metre. Well done! The transmi
Excellent signals on 17.2 khz received here in South West Wales 5/8/9 at 0830 utc. Many thanks to all concerned Hope to work you on 136 73s Mike GW4HXO.
To All from PA0SE Today I had good reception of SAQ on 17.2kHz. I used a Wandel & Goltermann SLM type SPM-12 connected to the aerial system for 136kHz with 26nF extra in parallel with the loading coi
Special stn SAQ on 17.2 khz approx 599 here in Scarborough/IO94SH - message copied 100% at 0828/0835 utc Stn SA6Q on 14035 khz 559 with bad qsb because of freq and skip to this QTH. 7035 would be a b
The SAQ signal is of the order of 100s 0f uV/m over much of Europe - so it is quite a strong signal, and can still be received if the antenna and RX are far from optimum. The usual limiting factor is
