Re: LF: No 2200m TX tonight

[N1BUG <paul@n1bug.com>]

Hi Markus,

That is very interesting. It changes about 25 % during the first 2-3
minutes, then it seems to settle down and not change any more. It
could be moisture somewhere, but any moisture here is solid ice or
frost now. I did not find any ice or frost in the transformer box or
the variometer. Could be insulators or something with the antenna
itself. I don't see any "fuzz" on the scomematch voltage trace so I
think (hope) nothing is arcing.

What worried me is this did not happen last winter so something has
changed. Everything accumulates some dirt here because of blowing
dust, smoke, etc. I wonder if a small amount of dirt on insulators
plus moisture can combine to make funny things happen.

Anyway I examined the little PA and it seems to have died due to
poor thermal interface between FET and heatsink. It's a physically
small FET and maybe was not screwed down tight enough with the
Sil-Pad interface, which was also a previously used one.

Normally I do not like to put drain voltage on the heatsink but as
an experiment for this little PA (which is totally an experiment
itself, but served me very well last winter) I will isolate the heat
sink from the chassis/PCB and mount the little FET directly to it.
The thermal resistance would be much lower! I think this is fine so
long as nothing shorts the heat sink to ground. In that case some
fuses die. ;-) This would add some pf of capacitance between drain
and ground but it would be in parallel with the quite large C of the
Class E tank, probably not much difference at 137 kHz!

Parts to repair the big PA should arrive Wednesday.

73,
Paul


On 11/23/18 4:29 PM, Markus Vester wrote:
> Hi Paul,
> 
> sorry to read that. Have pity on the poor FETs!
> 
> You mentioned that the antenna resistance is gradually decreasing
> (i.e. improving) during longer transmissions. I often see that
> effect here, with the current rising by say 20 % during the first
> few minutes. I've put it down to moisture or dew around the coil
> and insulators (tiny little polycarbomnnate pencil tubes), which
> evaporates as things warm up. It is more prominent during cold
> damp weather, and much more so with the very high antenna
> impedance at VLF than at LF.
> 
> Good luck, Markus
> 
> 
> -----Ursprüngliche Mitteilung----- Von: N1BUG <paul@n1bug.com> 
> An: rsgb_lf_group@blacksheep.org <rsgb_lf_group@blacksheep.org> 
> Verschickt: Fr, 23. Nov. 2018 22:12 Betreff: LF: No 2200m TX
> tonight
> 
> No transmissions from me this night. The little amplifier has
> died. I think it may be related to this resistance change in the
> antenna which is getting worse and worse.
> 
> I'm going back to MF for this night, sorry!
> 
> 73, Paul