Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: VLF: EbNaut transmissions on lower frequencies?, pre-tests: 6.47kHz

To: [email protected]
Subject: Re: VLF: EbNaut transmissions on lower frequencies?, pre-tests: 6.47kHz
From: DK7FC <[email protected]>
Date: Thu, 12 May 2016 10:31:25 +0200
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <279E0DEFDAFA4C849152DBBA3BFEDE8C@White> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
Hi Paul, VLF,

I have prepared my transmit site so i can run permanent transmissions now! Also the antenna current meter has been re-calibrated (actually no re-adjustment was necessary).

Just in case the extreme QRN will stop in the morning, i will run a new transmission:

f = 6470.00000 Hz
Start time: 12.05.2016   00:00:02 UTC
Symbol length: 100 s
Characters: 3
CRC 16
Coding 8K19A
Duration: 11h, 33m, 20s

Antenna current: 200 mA

Maybe this one will work better. And, to be honest, in the last transmissions the antenna current fell to about 170 mA after some time because the coils sagged a bit into each other due to the heat. But now this process should have stopped and the resonance was re-adjusted. I can measure a stable 205 mA now during the time of the observation.

73, Stefan



Am 11.05.2016 11:22, schrieb Paul Nicholson:

> I'm asking myselfe if you are working on the decode
> all the time

Yes, still working on the 19 char message.  I think I'm
about 1.3 dB short of decoding it.  Quite a challenge
because overnight 7th/8th was very noisy.

> This morning the QRN is very low, a pity that i have
> not been on the air.

The last few nights have been quiet.  Typical!

--
Paul Nicholson
--

<Prev in Thread] Current Thread [Next in Thread>