Return to KLUBNL.PL main page

[Top] [All Lists]

LF: RE: RF ceramic feed through isolators

To: "[email protected]" <[email protected]>
Subject: LF: RE: RF ceramic feed through isolators
From: VIGILANT Luis Fernández <[email protected]>
Date: Mon, 2 May 2016 09:00:22 +0000
Accept-language: es-ES, en-US
In-reply-to: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: AQHRo86EUZiS2AXEkUuOR4UTCkbMcp+lWCEg
Thread-topic: RF ceramic feed through isolators
Hi xLF ;-)

Your Oskar satellite seems ideal to be filled with SF6 to get a huge voltage 
isolation inside

Unfortunately this nasty gas has a huge greenhouse potential and no idea about 
the price, but
probably not cheap. It is heavier than air, so would keep Oskar filled as it 
were water

Other options may be CO2 or N2. The goal should be to remove any moisture 
(water in air)
Vacuum should work. But if the pump is very poweful you can get an slim Oskar 
and a flatened
Coil :(

So. Don't frill Oskar bottom yet !!! Go to the forest and think about it ;-)

73 de Luis

-----Mensaje original-----
De: [email protected] 
[mailto:[email protected]] En nombre de DK7FC
Enviado el: domingo, 01 de mayo de 2016 19:19
Para: [email protected]
Asunto: LF: RF ceramic feed through isolators

Hi all,

On ebay there are ceramic feed through isolators available, 2 pieces for
14 EUR. To my surprise he distrubutor sent me 3 for the same price.

One set has just been installed into the lid of my ton "Oskar" :-) I think 15 
kV rms will be the absolute limit , i will see. For higher power (on VLF) i 
will need to mount it into a larger plate which has to be mounted on the lit 
Unfortunately it is not water proof, see the images. I hope to fix that by 
using a 2 component glue.

Oskar will carry the loading coil with a maximum of savety and security.

73, Stefan

<Prev in Thread] Current Thread [Next in Thread>