|
I also discovered I had to use the REV button on
fldigi to copy Stefan correctly. This was because my oscillator setting in CW is
on the 'wrong' side (yes, I had the RX in CW mode).
Every burst of transmission lost the first 'T' in
TEST, maybe an idea to send 'V V V' or something at the start to allow the
system to lock.
Was most excellent copy anyway much of the
time.
Didn't hear anything of the GM station on CW, but
maybe closed down too early. Hope we get another chance with that
one!
Stefan, if you're reading this, called you several
times when you were CQing in CW a few evenings back, but my 25W did not get to
you. Also heard G3PDN calling you and you didn't hear him either. No idea who or
where G3PDN is, not on QRZ.
Vy 73,
Chris, G4AYT, Whitstable, Kent.
JO01MI.
----- Original Message -----
Sent: Wednesday, March 06, 2013 12:28
AM
Subject: Re: LF: Re: RTTY test
transmission
I think mark is high , shift hf from space
, fldigi has mark high as well ,
logging default is mark=qrg , I could not get fldigi
to print , but mmtty (new v) did with
the rev button -in-
how is Stefan generating rtty , is
there a mixer involved ?
G..
Sent: Tuesday, March 05, 2013 11:19 PM
Subject: Re: LF: Re: RTTY test transmission
On 05/03/2013 22:14, Graham wrote:
why is the 'REV' button 'in' on
MMTTY then mark = 1163
Hz with 477 usb dial set ?
G. Corr I haven't run that for years. Hmm, it seems to
indicate the same Mark frequency whether the REV is pushed or not, is that
anything to do with it.
Ed
Sent: Tuesday, March 05, 2013 7:55 PM
Subject: Re: LF: Re: RTTY test transmission
On 05/03/2013 19:43, Graham wrote:
Is the shift reversed ?
G..
?? No.
Ed
Sent: Tuesday, March 05, 2013 7:11 PM
Subject: Re: LF: Re: RTTY test transmission
Also Grabber http://www.g3zjo.talktalk.net/lfgrabber.html
Wide
View, showing your signal.
Eddie
On 05/03/2013 17:06, Stefan
Schäfer wrote:
Minto,
I'm excited. Was that you a few minutes ago?
I was writing in real time some stuff to my program which sent the
stuff in RTTY immediately. The TX was in idle mode during that time.
suddenly someone answered! "big brother is watching you" and so. Was
that you??
It looks like my PA is blown up once again. It is simply
not designed for a key-down transmission, so the idle mode is not ideal,
except i'm using a fan. Now i will once again replace 2x IRFZ48N and be
on air in 1 hour or earlier. Let us try the QSO then again, OK?
:-)
73,
Stefan/DK7FC
|
|
