Roland , I hope this is you ;)
https://dl.dropbox.com/u/16381257/DL3NDR.jpg
LA5VNA Steinar
loc:JO59jq
Mal and spam filtering: STRONG
www.opera.no
Den 13.10.2012 18:40, skrev Steinar Aanesland:
> No problem Roland :)
>
> I am monitoring and I will give you a report as soon as I get one.
>
> LA5VNA Steinar
> loc:JO59jq
> Mal and spam filtering: STRONG
> www.opera.no
>
> Den 13.10.2012 18:27, skrev Roland Bruestle:
>> Steinar,
>> sorry, I will already transmit from 19:00 MEZ ore 17:00 UTC
>> Roland
>>
>> Am 13.10.2012 17:41, schrieb Steinar Aanesland:
>>> Yes , I know so my dial is 0.473360
>>> and in my wspr soft the "RX BFO (Hz)" is 1500
>>>
>>>
>>> LA5VNA Steinar
>>> loc:JO59jq
>>> Mal and spam filtering: STRONG
>>> www.opera.no
>>>
>>>
>>>
>>> Den 13.10.2012 17:24, skrev Roland Bruestle:
>>>> Hi Steinar,
>>>> I have changed to WSPR-64.
>>>> Important is, that our signal is on the same frequency. The transmitted
>>>> frequency is 474.2+0.66=474.86KHz.
>>>> I will start at 19:00 UTC.
>>>> Good Luck
>>>>
>>>> Roland DL3NDR
>>>>
>>>>
>>>> Am 13.10.2012 16:51, schrieb Steinar Aanesland:
>>>>> Hi Roland
>>>>>
>>>>> First, I made a typo in my email. It should be wspr-64 .
>>>>>
>>>>> Markus (DF6NM) sent me this text some time ago:
>>>>>
>>>>> "WSPR 64 can be generated and received with the current setup. You
>>>>> would
>>>>> only have to change decimation factor from /dec=2048 to 4096, and adapt
>>>>> the arguments in the waitraster commands (repeat period and leadtimes)
>>>>> to full hour frames (3600 instead of 1800, etc). "
>>>>>
>>>>> If I have not completely misunderstood Markus, I think here is the
>>>>> right
>>>>> parameters:
>>>>>
>>>>> For TX :
>>>>>
>>>>> del audio1.dat
>>>>> start sndoutp1.exe /sr=48000 /dec=4096 /fc=660 /fn=audio1.dat /gain=1
>>>>> :loop
>>>>> waitraster 3600 20
>>>>> copy wspr.dat audio1.dat
>>>>> sleep 5
>>>>> goto loop
>>>>>
>>>>> I will use this for RX:
>>>>>
>>>>> del audio.tmp
>>>>> del audio2.dat
>>>>> start sndoutpt.exe /sr=48000 /fc=1500 /dec=128 /fn=audio2.dat
>>>>> start sndinput.exe /sr=48000 /fc=1500 /dec=4096 /maxsize=200k
>>>>> waitraster 3600 -24
>>>>> del audio.dat
>>>>> :loop
>>>>> waitraster 3600 -24
>>>>> del audio.dat
>>>>> waitraster -120 -1.5
>>>>> copy audio.dat audio2.dat
>>>>> goto loop
>>>>>
>>>>> NB! I am using fc=1500 on in- and output, but you can use your own
>>>>> settings.
>>>>>
>>>>> LA5VNA Steinar
>>>>> loc:JO59jq
>>>>> Mal and spam filtering: STRONG
>>>>> www.opera.no
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Den 13.10.2012 16:25, skrev Roland Bruestle:
>>>>>> Hello Steinar,
>>>>>> I can do it. I will start with 2W on the PA according 10mW ERP on
>>>>>> 474.86kHz.
>>>>>> I send you my parameters. Pleas check it.
>>>>>> How exact has the frequency to be? within ± 3Hz?
>>>>>>
>>>>>> Roland DL3NDR
>>>>>>
>>>>>>
>>>>>> PS: I still would like to make a wspr-60 experiment trying to
>>>>>> receive
>>>>>> from a transmitter with reduced power, but then some of you have to do
>>>>>> the TXing..
>>>>>>
>>>>>> LA5VNA Steinar
>>>>>> loc:jo59jq
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>
>
>
>
>
|
