It was not :(
LA5VNA Steinar
loc:JO59jq
Mal and spam filtering: STRONG
www.opera.no
Den 13.10.2012 19:52, skrev Steinar Aanesland:
> Roland , I hope this is you ;)
>
>
> https://dl.dropbox.com/u/16381257/DL3NDR.jpg
>
> LA5VNA Steinar
> loc:JO59jq
> Mal and spam filtering: STRONG
> www.opera.no
>
>
>
>
>
> Den 13.10.2012 18:40, skrev Steinar Aanesland:
>> No problem Roland :)
>>
>> I am monitoring and I will give you a report as soon as I get one.
>>
>> LA5VNA Steinar
>> loc:JO59jq
>> Mal and spam filtering: STRONG
>> www.opera.no
>>
>> Den 13.10.2012 18:27, skrev Roland Bruestle:
>>> Steinar,
>>> sorry, I will already transmit from 19:00 MEZ ore 17:00 UTC
>>> Roland
>>>
>>> Am 13.10.2012 17:41, schrieb Steinar Aanesland:
>>>> Yes , I know so my dial is 0.473360
>>>> and in my wspr soft the "RX BFO (Hz)" is 1500
>>>>
>>>>
>>>> LA5VNA Steinar
>>>> loc:JO59jq
>>>> Mal and spam filtering: STRONG
>>>> www.opera.no
>>>>
>>>>
>>>>
>>>> Den 13.10.2012 17:24, skrev Roland Bruestle:
>>>>> Hi Steinar,
>>>>> I have changed to WSPR-64.
>>>>> Important is, that our signal is on the same frequency. The transmitted
>>>>> frequency is 474.2+0.66=474.86KHz.
>>>>> I will start at 19:00 UTC.
>>>>> Good Luck
>>>>>
>>>>> Roland DL3NDR
>>>>>
>>>>>
>>>>> Am 13.10.2012 16:51, schrieb Steinar Aanesland:
>>>>>> Hi Roland
>>>>>>
>>>>>> First, I made a typo in my email. It should be wspr-64 .
>>>>>>
>>>>>> Markus (DF6NM) sent me this text some time ago:
>>>>>>
>>>>>> "WSPR 64 can be generated and received with the current setup. You
>>>>>> would
>>>>>> only have to change decimation factor from /dec=2048 to 4096, and adapt
>>>>>> the arguments in the waitraster commands (repeat period and leadtimes)
>>>>>> to full hour frames (3600 instead of 1800, etc). "
>>>>>>
>>>>>> If I have not completely misunderstood Markus, I think here is the
>>>>>> right
>>>>>> parameters:
>>>>>>
>>>>>> For TX :
>>>>>>
>>>>>> del audio1.dat
>>>>>> start sndoutp1.exe /sr=48000 /dec=4096 /fc=660 /fn=audio1.dat /gain=1
>>>>>> :loop
>>>>>> waitraster 3600 20
>>>>>> copy wspr.dat audio1.dat
>>>>>> sleep 5
>>>>>> goto loop
>>>>>>
>>>>>> I will use this for RX:
>>>>>>
>>>>>> del audio.tmp
>>>>>> del audio2.dat
>>>>>> start sndoutpt.exe /sr=48000 /fc=1500 /dec=128 /fn=audio2.dat
>>>>>> start sndinput.exe /sr=48000 /fc=1500 /dec=4096 /maxsize=200k
>>>>>> waitraster 3600 -24
>>>>>> del audio.dat
>>>>>> :loop
>>>>>> waitraster 3600 -24
>>>>>> del audio.dat
>>>>>> waitraster -120 -1.5
>>>>>> copy audio.dat audio2.dat
>>>>>> goto loop
>>>>>>
>>>>>> NB! I am using fc=1500 on in- and output, but you can use your own
>>>>>> settings.
>>>>>>
>>>>>> LA5VNA Steinar
>>>>>> loc:JO59jq
>>>>>> Mal and spam filtering: STRONG
>>>>>> www.opera.no
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> Den 13.10.2012 16:25, skrev Roland Bruestle:
>>>>>>> Hello Steinar,
>>>>>>> I can do it. I will start with 2W on the PA according 10mW ERP on
>>>>>>> 474.86kHz.
>>>>>>> I send you my parameters. Pleas check it.
>>>>>>> How exact has the frequency to be? within ± 3Hz?
>>>>>>>
>>>>>>> Roland DL3NDR
>>>>>>>
>>>>>>>
>>>>>>> PS: I still would like to make a wspr-60 experiment trying to
>>>>>>> receive
>>>>>>> from a transmitter with reduced power, but then some of you have to do
>>>>>>> the TXing..
>>>>>>>
>>>>>>> LA5VNA Steinar
>>>>>>> loc:jo59jq
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>
>>
>>
>>
>>
>
>
>
>
>
|
