Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: OK2BVG-DK7FC

To: [email protected]
Subject: Re: LF: OK2BVG-DK7FC
From: Stefan Schäfer <[email protected]>
Date: Tue, 05 Apr 2011 11:08:51 +0200
In-reply-to: <[email protected]>
References: <[email protected]>,<[email protected]> <[email protected]>,<[email protected]> <[email protected]>,<[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3
Hi Lubos,

Wow, that sounds like a good project! You are a real active radio amateur! Hope you'll get the chimney and generate a good signal, visible in 600 or so. And i hope for some LF CW QSOs soon too. Would you be interested? :-) :-)

73 es GL!

Stefan/DK7FC

Am 05.04.2011 10:53, schrieb Lubos OK2BVG:
Hello Stefan!
You are right, I would like to see your VLF DFCW-3 signal againVeselý obličej.

As for my plans ... I will have to find  out more better QTH for transmission. There is lots of as high as my antenna hight  buildings around my QTH here. I am sure, it  decrease  its  ERP significantly.  If I have more better  TX QTH, than I will can think about increase my power from 120W to ???W.  There is old  factory near my QTH. I discussed with the director about using a high factory chimney for my VFL purposes.  I am waiting for his answer. It is half  to half.

73!

Lubos, OK2BVG 


Date: Mon, 4 Apr 2011 23:11:04 +0200
From: [email protected]
To: [email protected]
Subject: Re: LF: OK2BVG-DK7FC

Hello Lubos,

Am 04.04.2011 19:20, schrieb Lubos OK2BVG:

I hope to see your signal soon. I built a new modification of your VLF active antenna, so it would be the good opportunity for testing this one.
But for test purposes it is better to have a weak signal, just above the noise ;-) But i know you are monitoring in DFCW-3...

So, what do you plan next Lubos? QRO to 500 W? This would allow you to produce a signal visible in TF i think. And you will be visible in even worse conds. Or your signal will be visible during the night period which allows you to send a full callsign or such funny things ;-) Any plans?

73, Stefan



73!

Lubos, OK2BVG


Date: Mon, 4 Apr 2011 16:03:06 +0200
From: [email protected]
To: [email protected]
Subject: LF: OK2BVG-DK7FC

Text zprávy Hello Lubos,

Congratulations! This is your first clear trace on my grabber in 6000 / 424 uHz. First i thought it is OE5ODL but there is no trace on his grabber but a strong trace on OE3GHBs grabber. And if you are sure about the TX frequency, it must be your signal. Very fine, 600 km ( http://no.nonsense.ee/qthmap/?qth=JN49IK&from=jn88ks ), my first OK RX contact :-)

Best 73 and QRO ;-)

Stefan/DK7FC

PS: Maybe we can have a "K" now once again? It is a better ID than a long dash...

Am 04.04.2011 13:49, schrieb Lubos OK2BVG:
Hello Eddie!
It would be my signal. We will see, but it seems to be promissing!
The conditions are good, so I will transmit until 12:00UT.
My PC is disciplined by WaG generator PS30 (10kHz). See my signal on the Stefan´s grabber in DFCW6000 window.
The frequency is correct: 8970.034Hz
My new PA 120W running on its full power. It is doing its best :-) !

73!

Lubos, OK2BVG




Date: Mon, 4 Apr 2011 11:30:17 +0100
From: [email protected]
To: [email protected]
Subject: Re: LF: 110404_OK2BVG

Hi Lubos

I am pretty sure we have here. I make your frequency 8.970034kHz. We will not get excited yet :-)

How stable is your signal, it seems possibly not stable enough for QRSS 60000 to help.

Continued operation after 11.00 UTC would help identification.

73 Eddie G3ZJO


On 03/04/2011 20:32, Lubos OK2BVG wrote:
Hello OMs!
I will be testing my VLF PA 120W tomorrow:

Date: 04.04.2011
Time: 07:00 UT - 11:00 UT
Antenna: Marconi L 24m up + 220m top load 
PA: 120W  
Identification: long carrier only
Mode:
FRQ: 8970.040 (+/- some few mHz :-)
Shift:


I hope, the conditions will be good :-)

73!

Lubos, OK2BVG   

<Prev in Thread] Current Thread [Next in Thread>