Re: LF: 110404_OK2BVG_G3ZJO

[qrss <qrss@talktalk.net>]

Hello Lubos

You signal is much clearer now see :-
http://dl.dropbox.com/u/23312120/zjo_grab.jpg
The noise is lower. Given the accurate frequency check this a positive reception.

I have checked Stefans' grabber and also OE3GHB.
It is good to return your nice reception of my QRP on 500kHz.
Confirm distance as around 1310km.

Well done.

73 Eddie G3ZJO
 
On 04/04/2011 12:49, Lubos OK2BVG wrote:

Hello Eddie!
It would be my signal. We will see, but it seems to be promissing!
The conditions are good, so I will transmit until 12:00UT.
My PC is disciplined by WaG generator PS30 (10kHz). See my signal on the Stefan´s grabber in DFCW6000 window.
The frequency is correct: 8970.034Hz
My new PA 120W running on its full power. It is doing its best :-) !

73!

Lubos, OK2BVG

---

Date: Mon, 4 Apr 2011 11:30:17 +0100
From: qrss@talktalk.net
To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: 110404_OK2BVG

Hi Lubos

I am pretty sure we have here. I make your frequency 8.970034kHz. We will not get excited yet :-)

How stable is your signal, it seems possibly not stable enough for QRSS 60000 to help.

Continued operation after 11.00 UTC would help identification.

73 Eddie G3ZJO


On 03/04/2011 20:32, Lubos OK2BVG wrote:

Hello OMs!

I will be testing my VLF PA 120W tomorrow:

Date: 04.04.2011

Time: 07:00 UT - 11:00 UT

Antenna: Marconi L 24m up + 220m top load 

PA: 120W  

Identification: long carrier only

Mode:

FRQ: 8970.040 (+/- some few mHz :-)

Shift:

I hope, the conditions will be good :-)

73!

Lubos, OK2BVG