Re: LF: Re: Separate Receiving Antenna?

[Anton Bärtschi <hb9asb@gmail.com>]

Hi Stefan
Thank you for the info. 

The site we will use is Sottens, where the last medium wave broadcast transmitter in Switzerland was shut down Dec. 31. last year.
I will probably not have to put a Kilowatt of LF into the 125m mast to get 1WERP, hi. Here some pics from the site.
I'm looking forward to have a QSO with you in good old CW.

73 de Toni, HB9ASB

2011/1/17 Stefan Schäfer <schaefer@iup.uni-heidelberg.de>

Hi Tony,

We haven't had QSO before but i am looking forward with interest to your LF activity and hope to be QRV as well. I am using a 100m or 300m vertical antenna and i am QRV in regularly CW. You will hear my signal! :-)

I've used an ordinary 50 Ohm attenuator of 14 dB just to prevent overloading my 706 as i used a 100m vertical recently. But the AF signal levels were poor so don't forget your headphones, as i did ;-) I will try a 50 Ohm band filter in the next test to prevent overloading by stations at 153 kHz and 129 kHz and all outside the band...

Good luck!

73, Stefan/DK7FC

Am 16.01.2011 18:48, schrieb Anton Bärtschi:

Hi Mal
Thank you for the response. So I will take my attenuator box to the site, connect the mast to the RX and see what happens. It will be difficult to get a receiving antenna far away enough, and I hope we will not get to much QRM from the line running up the mast for the lights, or from something else. But I will have a lot of help there. Ham engineers and operators. May be some of them will get the LF virus and  get in my footsteps. Soon I'll be back with more news about this event and I'm looking forward with pleasure for our next CW QSO. Digital modes are not on the plan - maybe QRSS3 if there is a need for.
73 de Toni

BTW. For those who speak German: I will report about the event on my Blog: www.funkperlen.wordpress.com