|
Yes Clemens
I am using m-delt4 sound card , with
opera to one channel and wspr to the other ,
the soundcard is mixing the two data streams
...making a better job, than using the same sound
card ... Rf path is the racal
ma1723 exciter , direct on 500 KHz , feeding , now
, qty 2 skanti solid state trp8500 250w pk
o/p class ab2 linear amps via a resistive
splitter , the amps are looking into a
5 port (1.5 kw) combiner , audio drive is set
to below agc action , or the modes change the pk
power of the other
All this to make 15 watts
per carrier ! but the system is wide band
and will work up to 30 MHz , all I do is
change the ATU ...
73 -G.
Sent: Friday, July 13, 2012 9:54 PM
Subject: LF: Re: DUAL BEACON WSPR + OPERA 500Khz
It wouild appear that if one
is txing WSPR and
OPERA parallel on one
TX,the TX and (a possible) power
amp wouild have to be linear,
i.e. at least in class AB ?
73
Clemens
DL4RAJ
----- Original Message -----
Sent: Friday, July 13, 2012 8:06 PM
Subject: LF: DUAL BEACON WSPR + OPERA
500Khz
All,
DUAL BEACON WSPR + OPERA 500Khz
Running dual beacon , parallel Tx
times ......Tx 100% duty cycle
Dial set 500.000 Khz USB
73 - Graham
G0NBD
E-Mail ist virenfrei.
Von AVG
überprüft - www.avg.de
Version: 2012.0.2195
/ Virendatenbank: 2437/5129 - Ausgabedatum: 13.07.2012
| 