Re: LF: Re: beacon on 501.59kc/s USB RX dial

["Graham" <g8fzk@g8fzk.fsnet.co.uk>]

Ok  Pete,

 

These are all  the  decodes  I have , I was using the  Skanti  r5003  Rx  with    40 ft alloy scaffold  pole   vertical  , no  atu , only  the  pre-selector  in the  rx , fed vis  abt  90 feet of  rg213 coax

 

Good  signal  for  10 watts  , just on the  edge  for the  qso  mode  , at  -20 dB  minimum , but  15 watts  would  do  the  job !

 

As I say  its  the  only  plug-and-play   data  mode  , just plug in place of the  CW key  ( the  development  was  based on the  racal  ma1723  , in  CW mode at  20  wpm  as the maximum   keying  speed and  envelope  shape)

 

 

73 -G.

 

 

 

 

14:00 500 M0FMT Op4 -21 dB

13:39 500 M0FMT Op4 -21 dB

13:26 500 M0FMT Op4 -21 dB

13:19 500 M0FMT Op4 -21 dB

13:13 500 M0FMT Op4 -21 dB

13:07 500 M0FMT Op4 -21 dB

13:02 500 M0FMT Op4 -21 dB

12:57 500 M0FMT Op4 -21 dB

12:50 500 M0FMT Op4 -21 dB

12:43 500 M0FMT Op4 -20 dB

12:38 500 M0FMT Op4 -20 dB

12:34 500 M0FMT Op4 -20 dB

12:14 500 M0FMT Op4 -21 dB

12:02 500 M0FMT Op4 -22 dB

11:54 500 M0FMT Op4 -27 dB

 

 

From: M0FMT

Sent: Saturday, June 02, 2012 1:59 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: Re: beacon on 501.59kc/s USB RX dial

Hi Graham

 

Yes very pleased with it so far I will change power soon trying to make up a PWM cct to have a continuously variable power on the rig (GW3UEP) Class E Fet O/P stage Gate. PC not crashed .... wait for it! .... for a bit now actually done nothing to stop it....... weird.

 I have only just got my head around opera......  thought it was a linear mode but this makes sense for LF comms. much more like a CW transmission which I like.

 

Thanks for all the info on opera btw.

 

73 es GL Pete M0FMT IO91UX

From: Graham <g8fzk@g8fzk.fsnet.co.uk>
To: rsgb_lf_group@blacksheep.org
Sent: Saturday, 2 June 2012, 13:37
Subject: Re: LF: Re: beacon on 501.59kc/s USB RX dial

Wow   and that  was  just using the  Op  w/fall !  You  could  reduce to  2 watts   and  still  decode !  

 

Glad the  system  is  working  for  you

 

G..

From: M0FMT

Sent: Saturday, June 02, 2012 1:33 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: Re: beacon on 501.59kc/s USB RX dial

Thanks Paul

 

Graham is right about QRG.

 

My PC keeps crashing so may go back to QRSS3 using my HB PIC keyer (not affected by RF) on the same QRG. Thanks fer looking.

73 es GL Pete M0FMT IO91UX

From: Graham <g8fzk@g8fzk.fsnet.co.uk>
To: rsgb_lf_group@blacksheep.org
Sent: Saturday, 2 June 2012, 13:12
Subject: Re: LF: Re: beacon on 501.59kc/s USB RX dial

could be   503.275  ?   +/-   a bit  !

 

G.

From: Clemens Paul

Sent: Saturday, June 02, 2012 12:58 PM

To: rsgb_lf_group@blacksheep.org

Cc: rsgb_lf_group@yahoogroups.co.uk

Subject: LF: Re: beacon on 501.59kc/s USB RX dial

>on 501.59kc/s USB RX dial setting

 

What is the actual tx qrg then?

Just for exactly looking if the signal is visible at all.

 

73
Clemens
DL4RAJ

----- Original Message -----

From: M0FMT

To: rsgb_lf_group@blacksheep.org

Sent: Saturday, June 02, 2012 1:21 PM

Subject: LF: beacon on 501.59kc/s USB RX dial

Hi All

Please report my beacon on 501.59kc/s USB RX dial setting. Temporary QRG.

73 Pete FMT

 

73 es GL Pete M0FMT IO91UX

 

E-Mail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 2012.0.2178 / Virendatenbank: 2425/5038 - Ausgabedatum: 01.06.2012