Re: LF: Beacon to the west...Success!

[John Bruce McCreath <weazle@hurontel.on.ca>]

Hello Stefan,

Attached is an Argo snip, the best of four captures overnight.
I'm using a 10 foot octagon loop, roughly based on a design
by VE7SL, into a DIY preamp, then a TS-440S.   Audio from
the receiver is processed with a DSP-59+ before being sent
to Argo in my old Win98 computer.  Frequency calibration is
off a bit, but it was the only signal present.

73, J.B., VE3EAR

LowFER Beacon "EAR"
188.830 kHz. QRSS30
EN93dr