On Sat, 3 Sep 2011 16:37:01 +0100
"Graham" <[email protected]> wrote:

> Ok John..
> 
> That  set  up may  be a  problem  for  dual  watch  with  only  1  rx
> 
> If you  set the  TX to   500K usb  and the  MFSK4  to  say   2KHz  ,
> that will  fit  inside  the  USB filter


Graham, LF,

My antenna is pretty narrow, and currently tuned at the WSPR section of
the band, so it precludes TX below 502kHz.

I've moved the ROS RX up to 502.0 dial - so the RF is centered on 503.5

The MFSK is on 502.4 dial / 503.4 RF (1kHz AF)

Hope this makes sense? Now I should be able to TX & RX in MFSK as well
as RX in ROS, all within 100Hz of each other.

Let's see what transpires - if someone wants to set up a ROS beacon...

John
GM4SLV