Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: beaconing to the west II ...and to the east, north and south.

To: [email protected]
Subject: Re: LF: beaconing to the west II ...and to the east, north and south...
From: Stefan Schäfer <[email protected]>
Date: Wed, 07 Sep 2011 15:51:40 +0200
In-reply-to: <[email protected]>
References: <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows; U; Windows NT 6.1; de; rv:1.9.1.8) Gecko/20100227 Thunderbird/3.0.3

Hi Bill, again,

Fine! So you will run the grabber tonite again? Looking forward to that!

If the noise was "awful" (one can even see a broad band noise during that time which must be local) and you use no noise reduction so far, we will surely gain some dB soon :-)

Yes, the trace was pretty exactly on the QRG and there were no other traces like that on the whole spectrogram :-)

About noise reduction: If you want, i can send you a usr file where you can see how to arrange that if you don't know how. Where does the AF comes out on your RX (e.g. 137 kHz = 1 kHz) ? What is the RX? A HF TRX with a SSB filter?

73, Stefan

Am 07.09.2011 15:02, schrieb Bill de Carle:
Stefan:

No noise blanking or noise reduction enabled and changed to a slower scroll rate later. Sound card sample rate was locked to GPS. QRN last night was pretty awful. Thanks for the tips. Ok on further tests. Conditions will surely improve as we get more into the fall season. I'll start earlier in the evening next time.
73,
Bill VE2IQ

At 08:36 AM 9/7/2011, Stefan wrote:
Hello Bill,

This looks very promising to me, although ID is still insecure.

21 mHz is a good choice but you should have enabled "one pixel per FFT bin" in the 1st register card of the spectrum display settings. Furthermore the spectrogram should scroll a bit slower, about 10 seconds per pixel is best i find. Which noise reduction setting did you choose? Any band limiting and noise blanking?

All in all i would say that this is my trace since time and frequency matches. But we should repeat this once again for beeing sure :-) Looking forward to that!

I will TX this night again, unless the rain isn't to strong (have replaced that stone pot above the coil since it causes to many losses...).

Thanks for watching! Very interesting :-)

73, Stefan/DK7FC

Am 07.09.2011 14:23, schrieb Bill de Carle:
At 04:14 AM 9/7/2011, Stefan wrote:
Hello Bill,

Fine :-) Can we have a capture showing the trace? What was the time of the detection?

73, Stefan

Am 07.09.2011 03:23, schrieb Bill de Carle:
Grabber is on tonight in Ontario Canada. If I stand far back and squint I'd say there was a trace (not decodable) on his frequency :-)

I should have included a link to the capture. Freq is right but maybe it was some other signal? FFT was 21 mHz per bin and the trace occurred at approx 0055 .. 0110 - Here it is:

http://www.nrtco.net/~ve2iq/grabs/capt15.jpg

Bill VE2IQ




<Prev in Thread] Current Thread [Next in Thread>