Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: Ferrite rod antenna - on-air testing

To: <[email protected]>
Subject: Re: LF: Ferrite rod antenna - on-air testing
From: "mal hamilton" <[email protected]>
Date: Tue, 30 Aug 2011 17:29:21 +0100
References: <7B6D5F6A8CEE4E3CAB04E35F1F9E9732@JimPC> <[email protected]> <E1516299428D43FCA8D1E70AFBDFE1A1@JimPC> <[email protected]> <F0DFF70F1BC54B4E86E2C60ADB7CD092@JimPC> <[email protected]> <002001cc672d$8ee9ad90$0401a8c0@xphd97xgq27nyf>
Reply-to: [email protected]
Sender: [email protected]
Jim can u es Stefan leave a break. I thought he would like more reports but
u both keep going on even under marginal condx
de mal/g3kev

----- Original Message -----
From: "mal hamilton" <[email protected]>
To: <[email protected]>
Sent: Tuesday, August 30, 2011 4:57 PM
Subject: Re: LF: Ferrite rod antenna - on-air testing


> Stefan
> Looking out for you
> de mal/g3kev
>
> ----- Original Message -----
> From: "Stefan Schäfer" <[email protected]>
> To: <[email protected]>
> Sent: Tuesday, August 30, 2011 4:29 PM
> Subject: Re: LF: Ferrite rod antenna - on-air testing
>
>
> > Jim, LF,
> >
> > I will go out of the city now, for a CW QSO on 136.5 kHz. Have already
> > prepared the LF system and link.
> > No lightnings so far in a radius of 1000km and above.
> >
> > QRV in 30 Minutes.
> >
> > 73, Stefan/DK7FC
> >
> >
> > Am 30.08.2011 14:11, schrieb James Moritz:
> > > Dear Stefan, LF Group,
> > >
> > >>
> > >> At least now the band seems quiet. Not sure how it will be in the
> > >> evening. Since i want to try from /p i need a sked, at least 2 hours
> > >> before. Do we want to try in the evening again?
> > >>
> > >
> > > I can be available from about 1530utc onwards this evening - I would
> > > suggest trying before darkness, as SNR will probably be better then.
> > > If you would like to try this evening, let me know when you expect to
> > > be at your /P location.
> > >
> > > Cheers, Jim Moritz
> > > 73 de M0BMU
> >
>
>



<Prev in Thread] Current Thread [Next in Thread>