Mal,
Impossible! ...unless Wolf runs not at least 10 MW!
It makes no sense to watch the QRG faster than QRSS-600, belive me!
Stefan
________________________________
Von: [email protected] im Auftrag von mal hamilton
Gesendet: Sa 12.06.2010 09:13
An: [email protected]
Betreff: LF: Re: AW: DLVLF qrv again
Stefan/wolf
I am getting a faint broken line on 8970 kcs at 0810 utc. Running at qrs10
de mal/g3kev
----- Original Message -----
From: "Stefan Schäfer" <[email protected]>
To: <[email protected]>
Sent: Friday, June 11, 2010 8:44 PM
Subject: LF: AW: DLVLF qrv again
Hello Wolf,
Fine! Very fine! I am excited again ;-)
Also fine: My car is running again! So my weekend is saved ;-) I will be on
a fieldday of our ham club this weekend but the grabber is running all the
time, you know...
Please try to transmit also in the morning between 7 and 10 UTC a constant
carrier on 8970.00 Hz, if possible. If you can see the trace in DFCW-600 you
can cahnge the QRG by 0,1 Hz up or down each 10 minutes or just use RIK's
QRS program to key your PA or so. Then, you can call CQ..., UFB! :-)
And could Marco/DD7PC sent a screenshot here on the reflector that shows
your signal over a time some hours? Maybe a 4,5 mHz window? So we could get
an impression about your signal stability. But this VFO we have looks very
stable, in find! I have an offset of 35 mHz and a drift of abt 0.5 mHz/K.
This is fine even for DFCW-6000 ;-)
Wish you fun!
Stefan
________________________________
Von: [email protected] im Auftrag von Wolf Ostwald
Gesendet: Fr 11.06.2010 20:15
An: [email protected]
Betreff: LF: DLVLF qrv again
Hi all D`ers !
DLVLF transmitting now ( 18:15 zulu ) on 8970 Hz in continuous carrier mode.
Not matched to resonance, but first E-field measurements show about 5 db
improvement.Must put current-meter in line later
73 de wolf
<<winmail.dat>>
|
