Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

AW: VLF: RX stations in Canada and US?

To: <[email protected]>
Subject: AW: VLF: RX stations in Canada and US?
From: Stefan Schäfer <[email protected]>
Date: Mon, 7 Jun 2010 12:13:12 +0200
References: <657E7065AC4C454AB63F6C7C2FF043F6@Black> <[email protected]> <003101cb04c2$0913cc10$0401a8c0@xphd97xgq27nyf> <1607287044.1492139.1275754813942.JavaMail.fmail@mwmweb034> <BF4A524700075746A6467658DFC7102C5107CB1257@ICTS-S-EXC2-CA.luna.kuleuven.be> <38A51B74B884D74083D7950AD0DD85E82A1C24@File-Server-HST.hst.e-technik.tu-darmstadt.de> <[email protected]> <[email protected]> <02a901cb05bb$695236d0$0201a8c0@Clemens04> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: AcsF6rVBqvhnWf4aQeK1OjD6Fz7VhwAPapPk
Thread-topic: VLF: RX stations in Canada and US?
Hello Joe,
 
Fine! It is interesting and motivating to see that you are also doing steps to 
become QRV :-)
 
Jim/M0BMU has designed a loop RX antenna with a preamp and a band filter for 
the Dreamers Band ®  that seems to work very well. At least, he has copied my 
signal (2mW ERP to that time) out of a distance of 657 km 
(http://abelian.org/vlf/ss100321/), the second farest distanced reception of an 
amateur so far! This may be an option for you...
If i remember correctly, the circuit is available on the sites of G3XBM and it 
was posted here before some weeks...
 
73, Stefan/DK7FC

________________________________

Von: [email protected] im Auftrag von [email protected]
Gesendet: Mo 07.06.2010 04:35
An: [email protected]
Betreff: Re: VLF: RX stations in Canada and US?



Thanks to Stefan and Clemens for the helpful info.  Tonight the RX
with the 100m wire was used to copy the  Alpha sigs on 11.905 kHz at
about 20 dB above the noise.  The RX is noticibly less sensitive
at 8.97 kHz, but there is still much QRN there.

The calibration of the RX and sound card seem good to within 0.5 Hz.

Eventually a loop will be tried with the sound card.

73
Joe






<<winmail.dat>>

<Prev in Thread] Current Thread [Next in Thread>