Re: LF: RE: QRP'p 500KHz from an Altoids tin - <report>

[Gary - G4WGT <g4wgt@tiscali.co.uk>]

Hi Eddie,

I have been running SpecLab at QRS10 & have managed to get what appears to be your signal (200 represents 503.200 kHz), my loc IO83qo which makes the distance 188.9 km or 117.4 mls. Captured at 1245utc.

73, Gary - G4WGT.

2010/1/24 g3zjo <g3zjo@npton.plus.com>

Thanks Dave and all the other reporters / lookers. I will leave the MEPT on all day and until well after dark for Rik and GM.

 

Dave, yes the modulation is very normal for me, 5 Hz FSK QRSS3. I will now switch to an odd mod, 5/5/5.

 

73

 

Eddie

 

-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] On Behalf Of Dave G3WCB
Sent: 24 January 2010 10:49
To: rsgb_lf_group@blacksheep.org
Subject: LF: QRP'p 500KHz from an Altoids tin - <report>

 

Hi, Eddie.

 

Screenshot attached. You are "O" copy here, and I think the QRB is about 100 km. The antenna here is a 20m "Tee" at 5m, and the RX is a Wandel & Golterman SPM-30 with a 24 Hz IF bandwidth

 

By the way, you are transmitting a hybrid QRSS-DFCW signal, which contains elements of both modes!

 

(With QRSS, one sends dots and dashes on a single frequency, and drop the carrier between characters, just like regular speed CW. With Double frequency CW, dots and dashes are equal length, but on mark and space frequencies, and the carrier drops between letters.)

 

73, Dave G3WCB IO91RM nr Windsor, S.E.England

-----Original Message-----
From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org]On Behalf Of g3zjo
Sent: 24 January 2010 09:53
To: rsgb_lf_group@blacksheep.org; GQRP@yahoogroups.com
Subject: LF: FW: [Knightsqrss] QRP'p 500KHz from an Altoids tin

Hi All

 

I am running my QRPp MEPT again this morning all reports welcome. Just a note on receiving the QRSS3. :-

 

Using Spectran in - Preset QRSS3 - from the - Mode - menu. With the standard settings and dial on the WSPR dial frequency 502.4KHz my signal will be around 800 on the Spectran Waterfall.

Spectran will run at the same time as WSPR so those looking for WSPR signals can spot the evil Data and evil non qso Visual QRSS at the same time.

 

Frequency 503.22KHz

 

Modulation QRSS3 FSK, mainly, I do vary it, maybe some periods of 5/5/5 Morse

 

Power 500mW at 50 Ohms

 

Total current consumption 96mA at 12 Volts

 

Antenna 6m Top Load Vertical

 

ERP >1mWatt

 

 

Eddie G3ZJO IO92ng

 

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.730 / Virus Database: 271.1.1/2639 - Release Date: 01/22/10 19:33:00

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.730 / Virus Database: 271.1.1/2639 - Release Date: 01/22/10 19:33:00

capt1001241245.jpg
Description: JPEG image