Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Re: JT65-A <<< Beacon on 503 Khz (DIAL FREQ = 501.7 USB)

To: <rsgb_lf_group@blacksheep.org>
Subject: LF: Re: JT65-A <<< Beacon on 503 Khz (DIAL FREQ = 501.7 USB)
From: "Gary - G4WGT" <g4wgt@tiscali.co.uk>
Date: Sat, 8 Mar 2008 21:18:19 -0000
References: <47D1A6FF.1080803@telia.com> <00d001c8809a$71f10940$0900a8c0@Lark> <Pine.LNX.4.64.0803072006550.31396@plato.ucs.mun.ca> <001301c880b3$c8f8a9a0$0900a8c0@Lark> <000801c88111$a25c1530$0e00000a@AGB> <004301c88122$618a8bc0$0900a8c0@Lark> <002201c88130$50f2c580$0e00000a@AGB> <003a01c8814b$19d44090$0e00000a@AGB> <016301c8815b$c98012c0$6401a8c0@wgt01> <005301c8815f$7624d260$0e00000a@AGB>
Reply-to: rsgb_lf_group@blacksheep.org
Sender: owner-rsgb_lf_group@blacksheep.org
Graham, LF,

Good mode then !

As an experiment I connected an antenna which gave no indication of any received signal either by visual on the waterfall or by loudspeaker, adjusted the Rx audio level to 0db again & still getting 100% decode.
A true weak signal mode.

73

Gary - G4WGT - IO83qp

----- Original Message ----- From: "Graham" <g8fzk@g8fzk.fsnet.co.uk>
To: <rsgb_lf_group@blacksheep.org>
Sent: Saturday, March 08, 2008 9:00 PM
Subject: LF: JT65-A <<< Beacon on 503 Khz (DIAL FREQ = 501.7 USB)


Thanks for the report Gary, I posted a note in the multipsk user group, stn in Norway is getting a reliable decode on the signal , using multipsk, using a 16 mtr long dipole !
oddly the  wsjt is not that bad , I had a go , while logged onto  the web 
user group , its bit where you dont need to  tune , got me at  first , Im 
using it to send with , the rx is active , pity Jim is not about !
G ..


<Prev in Thread] Current Thread [Next in Thread>