Hello Rik and LFers!
I will be listening on 503.1kHz for you. As Paul-Henrik, OH1LSQ, has
been written, the X-band QSO will be good idea. For example used
frequency 3533kHz?
Good luck on 500kHz!
Lubos, OK2BVG, JN88KS
****************************************************
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Rik Strobbe
Sent: Tuesday, January 29, 2008 4:08 PM
To: [email protected]
Subject: LF: QRV on 503kHz
Dear all,
I just finished my 500kHz antenna, 9m high and 26m long T-antenna.
With a temporary PA (abt 100W) I can get 1.3A into the antenna,
guestimated ERP is about 0.5 Watt. Enough to put a nice signal on the
Shetland grabber.
I will try to be QRV tonight (abt 20-22UTC) on 503,1kHz.
The setup is very experimental, PA is getting quite hot and TX/RX
switching is by swapping a cable. So be prepared for some TX-delays
and short transmissions.
I will be using my short call: OR7T
73,
Rik
ON7YD - OR7T
Disclaimer: http://www.kuleuven.be/cwis/email_disclaimer.htm
|
