Hi Laurence, Fine! Do you wish to receive an amateur radio signal there down once time? Take a look on my dreamers band grabber (http://www.iup.uni-heidelberg.de/schaefer_vlf/DK7FC_VLF_Grabber.html).
Using Spectrum labs with some new set ups - see attachments - File, Load settings, then select one of the above youve pasted previously - the other piece of software is the SAQ RX http://web.telia.co
and I see there is a newer version than the one I have its simplicity is what attracts me Bob K3DJC ____________________________________________________________ Penny Stock Jumping 2000% Sign up to t
Dear Laurence, VLF Dreamers, those settings will require some adaptions, regarding samplerate etc. (see posting below). Attached is the current setup of my VLF grabber with 0.95 mHz resolution. SpecL
Dear Laurence, VLF Dreamers, those settings will require some adaptions, regarding samplerate etc. (see posting below). Attached is the current setup of my VLF grabber with 0.95 mHz resolution. SpecL
Hello : PC = lots of noise !!! 73 Xtian / F1VL Laurence KL1X a écrit : I had my first taste after a few year break of looking at LF/Dreamers "band" from a quietish location here in Oklahoma - well no
What does it take to open these files ???????????? Bob K3DJC On Thu, 22 Apr 2010 08:56:56 -0800 Laurence KL1X <[email protected]> writes: Using Spectrum labs with some new set ups - see
Thanks Markus -Ive been concentrating on rx soundcard calibration and dont have (within my sound card limitations) anything I can really put my hand on my heart and cal against here in the Central Pl
I did. It was my first attempt to write a window$ GUI program from scratch :-) It doesn't have any narrow band analysis functions like waterfall etc. Programs such as Wolf's Spectrum Lab and Alberto'
Hello Stefan, the carrier on your grabber is it also PLC or is someone doing a test transmission? Maybe this was asked before. But I'm becoming old ;-)) vy73 Horst DO1KHS/DI2AN I had my first taste a
Hi Lawrence, probably you could use the lowest-frequency alpha station for calibration purposes. I heard from Wolf that he was working on a built-in frequency calibration tool for SpectrumLab but I d
which rcv are you using. I sort of considered to use that antenna with the SAQ Panoramic rcv program . I forget who wrote it Bob K3DJC On Thu, 22 Apr 2010 07:09:03 -0800 Laurence KL1X <hellozerohello
WOW thanks totally out of touch with this program was OK with it many iterations ago. I copied the files into its config choices so will have to play with it thanks Bob K3DJC On Fri, 23 Apr 2010 00:2
Stefan, Xtain, Danielle, Bob - thanks for the comments - On the QRM from the PC - no I dont get any (problematic) unless the loop is within 3 metres or so of the loop - I have a 15m length of RG58 50
I had my first taste after a few year break of looking at LF/Dreamers "band" from a quietish location here in Oklahoma - well not that quiet due to weather out to my West but apart from the mosquitoe
This is the same question I wanted to ask after having had a look to the picture: any problems with the laptop sitting on the bench? Regards Daniele Hello : PC = lots of noise !!! 73 Xtian / F1VL Lau