Dear LF Group, Thanks for the reception reports from last night. I will be running the beacon again tonight from 2200utc, WOLF 20 mode on 503.800kHz. Cheers, Jim Moritz 73 de M0BMU
This sampling rate is re-sampled to a "standard" rate by Windows when listening through the soundcard, and by the VAC software (Virtual Audio Cable) when routing the signal to other programs such as
ALL NOVs expire on February 29th, mine certainly says that. The date of issue is irrelevant, I understand they will be sending renewals out automatically to everybody, presumably dated to start on Ma
Alberto, Yes. I'd suggest that you put that suggestion on the Perseus list to remind Nico that this question should have higher priority than the colour of buttons :-). I mentioned this VAC stuff to
Dear Jim, LF group, yes, all Wolf GUI settings were left at "factory default" except the speed which was changed to Wolf 20. Your signal was strong, clearly visible in the waterfall (well, with some
Jim, Jay and I have concluded that your WOLF signal is not copyable over here at its present power level. I have tried on at least half of the nights you have been running, but without any hint of a
Dear LF Group, The WOLF 20 beacon is running again with same conditions as before - 503.800kHz, 100mW ERP, from about 2215utc. Any reports would be very welcome. Cheers, Jim Moritz 73 de M0BMU
Dear LF Group, The WOLF 20 beacon is running again (from 2250utc) on 503.800kHz with 100mW ERP. Any reports would be very welcome. Thanks to SM6LKM for the reception report - the usual problem people
Dear LF Group, The M0BMU WOLF 20 beacon is running again on 503.800kHz - got started a bit late tonight at about 2310utc. Any reports welcome. Cheers, Jim Moritz 73 de M0BMU
Jim, It depends what date you got your current NOV. Renewal for some could be June/July etc, the DX season will be over, fortunately mine was dated end Feb. I am now building a new TX to generate sui
