Hi Wolf and group. The grabber does indeed use Spectrum Lab's http server, and I have already slowed the java refresh down to 5 seconds. I am watching the data throughput, and it seems that the syste
Gents, Initial experiments with restricted bandwidth showed this effect, and when I changed the refresh rate to 5 sec on the java version, it improved. so I have just (17:58) changed the refresh to 1
Cracking signal here Gary, as you may have noticed. No sign of MRF, not seen often here at this hour, and never very strong. will try to get the main antenna working this weekend WX permitting Regard
just back in shack, rig is on, will listen... Hi Mark, Mime-Version: 1.0 Content-Transfer-Encoding: 7bit Content-Type: text/plain; charset=ISO-8859-1; format=flowed I am calling on 502.250 approx, li
Hi Dave, LFgroup Thanks for the report. Tonight have heard GI4DPE, GI3PDN, GW4HXO, and had a QSO with G3LDO, probably my ODX 2-way on MF. G0MRF is again quite strong, well over 20db above noise on th
Hi all, my antenna match problem is fixed, and i can transmit again (the low winds mean the antenna has been up all week) The problem causing the mismatch was an artificially raised water table, due
I am calling on 502.250 approx, listening also 3575 KHz, anyone on? MRF beacon is strong tonight on main antenna, visible on ferrite rod occasionall, as is di2ag rgds Mark GM4ISM IO85AR
copy u on 7033 Roman, pse call if when u finish with Mal if u get good enuf sig on 500 Look your trace on the Andy's grabber, Mark! http://www.cln.ru/~efremov/grabber.html Roman * Mark <markhughes1@b
Roman, Nicolas Thanks for the reports guys Sure was weak Roman, hope stronger on the other antenna, but does look like it may have been me. a little more work to interface the PC, then I can have the
Roman, some weak signal possibly from somewhere in Scotland? :<) mark 502,225KHz QRSS3 -- Original Message -- From: "Roman RW3ADB" <[email protected]> To: <[email protected]> Sent: Sunday,
Hi Markus and group. The source I have been using recently is xtal controlled, and whilst not temperature controlled, should not vary much. The frequency as measured tonight, using a GPS locked frequ
Hi all, I am testing again tonight on 502.2, new 120W TX, and upgraded Antenna tuner.. managed to overheat the old one. a bit OF QRSS and normal CW, but mostly carrier as I make measurements. should
back on for about 15 min soon! Hi Mark! Are you finished to TX? Roman * Mark <[email protected]> [Wed, 9 Apr 2008 20:56:35 +0100]: Hi all, I am testing again tonight on 502.2, new 120W TX,
I see it Roman!, positive ID on my call at last. also RX 7033 Mark Look your trace on the Andy's grabber, Mark! http://www.cln.ru/~efremov/grabber.html Roman * Mark <[email protected]> [Su
Mal, Lf group Looks like you are strongest into Nuremberg at the moment Mal, HI PA running cool, very please with the results so far. I will have to QRT around 23z tonight, I have to go to the airpor
Now QRT, a few more component upgrades, but now sable operation at 120W To antenna key down for as long as I like. hopefully WX will be ok for operating tomorrow antenna needs low winds and dryish co
Paul-Henrik, LF Thanks for the report, put out a few normal CQs listening 7031, no replies, QRT now. GN all Mark GM4ISM -- Original Message -- From: "Paul-Henrik" <[email protected]> To: <rsgb_lf_group@
Running QRSS3 beacon mode keyed by PC on 502.225 or thereabouts until 23:30z nominal Mark GM4ISM -- Original Message -- From: "mal" <[email protected]> To: "rsgb" <[email protected]> S
Gary I use spectrum lab. It has a dedicated HTTP server, which is OK so long as your IP address is not constantly on the move, you may note that I have set the port to 8080 not 80 as per normal HTTP,
Dear all, I have just discoverd why my 500KHz grabber has been off line for a while.. My ISP has changed my IP address.. (they do not offer a static address, but it has been constant for years, only
