Re: LF: Neo6M vs Neo7M

[Terry G0EZY <GW0EZY@sky.com>]

On 26/06/2017 17:40, Terry G0EZY wrote:
> Hi Stefan
>
> Can the 6M be re-programmed the same as the 7M - as described by 
> Domenico in his post 23 June:
Answered my own question from the data sheets (yes - both modules have 
configurable time pulses) but looks like its either PPS or reference 
frequency??
6M 1.7.2
Timepulse and frequency reference
NEO-6T comes with a timepulse output which can be configured from 0.25 
Hz up to 10 MHz. The timepulse can
either be used for time synchronization (i.e. 1 pulse per second) or as 
a reference frequency in the MHz range. A
timepulse in the MHz range provides excellent long-term frequency 
accuracy and stability
7M 1.9
TIMEPULSE
A configurable time pulse signal is available with all u-blox 7 modules. 
The  TIMEPULSE  output generates pulse  trains synchronized  with GNSS 
or  UTC  time  grid  with  intervals configurable over a wide frequency 
range. Thus it
may be used as a low frequency time synchronization pulse or as a high 
frequency reference signal. By  default  the  time  pulse signal  is  
configured  to  1 pulse  per  second (Frequency of time pulse signal 
0.25 Hz ... 10  MHz
 (configurable))  For  more  information  see  the u-blox  7 Receiver 
Description including Protocol Specification
.