Re: LF: Re: digi es CW

[Andy Talbot <andy.g4jnt@gmail.com>]

Well, I for one would generate them as an I/Q baseband stream and upconvert using a quadrature converter.  Just as every modern piece of radio communincations equipment does.

No expensive narrow band filters or IF stages.

'jnt

On 24 December 2015 at 20:40, Graham <g8fzk@g8fzk.fsnet.co.uk> wrote:

Now Now , If there  was no SSB  tx/rx, how  could you hope to  send  all  those  strange linear  phase continuous  multi frequency data systems ?

 

G,)

 

 

From: Andy Talbot

Sent: Thursday, December 24, 2015 7:15 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: Re: digi es CW

SSB and especially CW - just tooooo boring for those not yet retired

Killing amateur radio

Where are the youngsters

Embrace the 20th century now we're in the 21st

Andy / G4JNT

On 24 December 2015 at 18:52, David Hine <evad_hine@yahoo.co.uk> wrote:

Digital -the death of ham radio -boring!! -no proper research as the 'feel' of real radio is lost -may as well go on Skype or Facebook!!

Merry Christmas, Dave
 

---

From: Fausto Coletti <ik4nmf@gmail.com>
To: rsgb_lf_group@blacksheep.org
Sent: Thursday, 24 December 2015, 17:07
Subject: LF: Re: digi es CW

Never, never, never...rather I become friar and I go to a cloistered convent !

And for delight of those who use only the digital mode, this is the power supply of my HF PA.

 

https://www.dropbox.com/s/4tkndywd9v38dld/foto.JPG?dl=0 

 

Merry Christmas to all analog or digital ham  :-))

----- Original Message -----

From: mal hamilton

To: rsgb_lf_group@blacksheep.org

Sent: Thursday, December 24, 2015 4:42 PM

Subject: LF: digi es CW

DIGI MODES

Fall asleep over the keyboard

Go for Xmas Dinner

Go down the pub and get drunk

Sleep for a week

And

the rig still Belches out wspr or opera and is seen world wide, no rush back for results.

 

CW MODE

Fall asleep over the PA running 2 x 4CX 1500 tubes

A flash and a bang

Operator is Zapped and reduced to vapour

Signal never left the shack, no result

Operator SK SK

 

You can see why DATA MODES are preferred, there is no option if the operator of today wants to remain alive and is not in a hurry for results

 

Operators of today are sluggish and move in jerks sort of robotic and are more suited to chips and not daring like those of yesteryears that would glare at 200 Watt filaments with 10 Kilovolts on the anode and had to move fast to avoid a SK SK situation

 

I expect some old timers are also getting sluggish and moving towards Digital, the easy life which also prolongs the pension.

 

Merry Xmas and avoid Danger------think Digital

 

de G3KEV