Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

LF: Re: USB TO SERIAL

To: <[email protected]>
Subject: LF: Re: USB TO SERIAL
From: "mal hamilton" <[email protected]>
Date: Wed, 18 Nov 2015 18:32:18 -0000
Importance: Normal
In-reply-to: <7E7DFBB4D102A04DB5ADC88D66628A4A44473D47@ICTS-S-MBX1.luna.kuleuven.be>
References: <3B220F9D88E34AD78830D330E1F9BC91@malcoHP>,<CAA8k23RX5Meaab8yryohsQyT7vDUvY6JmOYTtqYT02bMxDjkHA@mail.gmail.com> <7E7DFBB4D102A04DB5ADC88D66628A4A44473D47@ICTS-S-MBX1.luna.kuleuven.be>
Reply-to: [email protected]
Sender: [email protected]
Andy
What is actual built module name
mal/g3kev
 
Sent: Wednesday, November 18, 2015 2:39 PM
Subject: RE: LF: USB TO SERIAL
 

I agree, you can buy FT232 absed ready made modules for about 10-15 Euro.

 

73, Rik  ON7YD

 


Van: [email protected] [[email protected]] namens Andy Talbot [[email protected]]
Verzonden: woensdag 18 november 2015 15:16
Aan: [email protected]
Onderwerp: Re: LF: USB TO SERIAL

Without a doubt, One from FTDI chip : www.ftdichip.com
 
Absolutely flawless, drivers easy to install.  Never had a single problem with their family.
I use the raw FT232 chips and ready made modules , and so far have probably connected something like 60 - 70 of them at various times (at least that is what the all-time USB finder reports)
 
Beware cheapskate Ebay purchases - there are several Chinese copies out there that are very bad indeed.
 
Andy  G4JNT
 
 
On 18 November 2015 at 13:57, mal hamilton <[email protected]> wrote:
MF
What is the best interface chipset for USB to SERIAL port device. Have heard some are not good
 
de mal/g3kev
 
 
<Prev in Thread] Current Thread [Next in Thread>