Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

RE: LF: USB TO SERIAL

from [Rik Strobbe] [Permanent Link][Original]
To: "[email protected]" <[email protected]>
Subject: RE: LF: USB TO SERIAL
From: Rik Strobbe <[email protected]>
Date: Wed, 18 Nov 2015 14:39:32 +0000
Accept-language: nl-BE, en-GB, en-US
In-reply-to: <CAA8k23RX5Meaab8yryohsQyT7vDUvY6JmOYTtqYT02bMxDjkHA@mail.gmail.com>
References: <3B220F9D88E34AD78830D330E1F9BC91@malcoHP>,<CAA8k23RX5Meaab8yryohsQyT7vDUvY6JmOYTtqYT02bMxDjkHA@mail.gmail.com>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: AQHRIgnCHxTdkVzcS0CygFKCwQQ3np6hwoCAgAAW4g2AAABsBQ==
Thread-topic: LF: USB TO SERIAL

I agree, you can buy FT232 absed ready made modules for about 10-15 Euro.

 

73, Rik  ON7YD

 

Van: [email protected] [[email protected]] namens Andy Talbot [[email protected]]
Verzonden: woensdag 18 november 2015 15:16
Aan: [email protected]
Onderwerp: Re: LF: USB TO SERIAL

Without a doubt, One from FTDI chip : www.ftdichip.com

Absolutely flawless, drivers easy to install.  Never had a single problem with their family.
I use the raw FT232 chips and ready made modules , and so far have probably connected something like 60 - 70 of them at various times (at least that is what the all-time USB finder reports)

Beware cheapskate Ebay purchases - there are several Chinese copies out there that are very bad indeed.

Andy  G4JNT


On 18 November 2015 at 13:57, mal hamilton <[email protected]> wrote:
MF
What is the best interface chipset for USB to SERIAL port device. Have heard some are not good
 
de mal/g3kev
 

[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: LF: Re: EbNaut test transmission, Paul Nicholson
Next by Date:  LF: Re: USB TO SERIAL, mal hamilton
Previous by Thread:  Re: LF: USB TO SERIAL, Andy Talbot
Next by Thread:  LF: Re: USB TO SERIAL, mal hamilton
Indexes:  [Date] [Thread] [Top] [All Lists]