Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

LF: Re: USB TO SERIAL

from [mal hamilton] [Permanent Link][Original]
To: <[email protected]>
Subject: LF: Re: USB TO SERIAL
From: "mal hamilton" <[email protected]>
Date: Wed, 18 Nov 2015 16:49:27 -0000
Importance: Normal
In-reply-to: <CAA8k23RX5Meaab8yryohsQyT7vDUvY6JmOYTtqYT02bMxDjkHA@mail.gmail.com>
References: <3B220F9D88E34AD78830D330E1F9BC91@malcoHP> <CAA8k23RX5Meaab8yryohsQyT7vDUvY6JmOYTtqYT02bMxDjkHA@mail.gmail.com>
Reply-to: [email protected]
Sender: [email protected]
Tnx Andy es Co for the info
de Mal/G3KEV
 
 
Sent: Wednesday, November 18, 2015 2:16 PM
Subject: Re: LF: USB TO SERIAL
 
Without a doubt, One from FTDI chip : www.ftdichip.com
 
Absolutely flawless, drivers easy to install.  Never had a single problem with their family.
I use the raw FT232 chips and ready made modules , and so far have probably connected something like 60 - 70 of them at various times (at least that is what the all-time USB finder reports)
 
Beware cheapskate Ebay purchases - there are several Chinese copies out there that are very bad indeed.
 
Andy  G4JNT
 
 
On 18 November 2015 at 13:57, mal hamilton <[email protected]> wrote:
MF
What is the best interface chipset for USB to SERIAL port device. Have heard some are not good
 
de mal/g3kev
 
 
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  RE: LF: USB TO SERIAL, Rik Strobbe
Next by Date:  LF: Peter Dodd, G3LDO, SK, Mike Dennison
Previous by Thread:  LF: Some MF TA again, DK7FC
Next by Thread:  LF: Peter Dodd, G3LDO, SK, Mike Dennison
Indexes:  [Date] [Thread] [Top] [All Lists]