Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

LF: RE: Zmag of 45.6 Ohms OK, or should I try for better?

from [Rik Strobbe] [Permanent Link][Original]
To: "[email protected]" <[email protected]>
Subject: LF: RE: Zmag of 45.6 Ohms OK, or should I try for better?
From: Rik Strobbe <[email protected]>
Date: Fri, 30 Oct 2015 14:46:39 +0000
Accept-language: nl-BE, en-GB, en-US
In-reply-to: <[email protected]>
References: <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Thread-index: AQHREyBXtGR+CwHcLUmCXUkP3GOXB56EG8w0gAABhnI=
Thread-topic: Zmag of 45.6 Ohms OK, or should I try for better?

Hi Chris,

 

I wouldn' worry about that.

Assuming that you aim at 50 Ohm the SWR will be 1.1/1.

This will cause a reflected power of 0.2% (or otherwise: a decrease of 0.01dB of the radiated power).

 

73, Rik  ON7YD - OR7T

 

Van: [email protected] [owner-rsgb[email protected]] namens Chris Wilson [chris@chriswilson.tv]
Verzonden: vrijdag 30 oktober 2015 15:31
Aan: rsgb[email protected]
Onderwerp: LF: Zmag of 45.6 Ohms OK, or should I try for better?

30 October 2015


I now have my loading coil running without a matching transformer, as
I have very slightly improved my ground. I get a Zmag of 45.6 Ohms, is
it worth worrying about? Thanks, a scan is at:


http://www.chriswilson.tv/30-10-2015.jpg



--


Best regards,
 Chris                            mailto:[email protected]


[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  LF: Zmag of 45.6 Ohms OK, or should I try for better?, Chris Wilson
Next by Date:  LF: First of its kind?, John Langridge
Previous by Thread:  LF: Zmag of 45.6 Ohms OK, or should I try for better?, Chris Wilson
Next by Thread:  Re: LF: RE: Zmag of 45.6 Ohms OK, or should I try for better?, Chris Wilson
Indexes:  [Date] [Thread] [Top] [All Lists]