Hi All,
in meantime I know more about all.
I can decode myself and other stations, range depending on daytime.
My conclusion is, that my tx power is to small ( and Antenna) in order to be
heard. ( 1,3 Watt )
This power ist working on 30m , but not on MW.
I will built a Power Amp soon.
Thanks for all hints and coments
73
Uwe
-----Ursprüngliche Nachricht-----
From: Dave G3WCB.
Sent: Wednesday, February 18, 2015 10:47 PM
To: [email protected]
Subject: LF: : WSPR 630m [Setup]
Hi, Uwe.
I've attached a screenshot of my WSPR waterfall and logging window. I don't
use the WSPR software to transmit, so my TX percentage is set to 0%. The
snapshot shows the transmission from my own U2.
You should be able decode your own transmissions locally if your U3 is set
up correctly. The "transmit frequency" setting on the U2 determines the
actual carrier frequency of the WSPR transmissions - you do not need to add
any 1500 Hz offset. I'm sure that the U3 works the same way
73, Dave G3WCB IO91RM
-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Clemens Paul
Sent: 18 February 2015 18:32
To: [email protected]
Subject: LF: RE: Re: WSPR 630m
Hi Uwe,
Question: what have I to activate ?
Must be "Idle" marked or not ?
I am uploading spots
In WSPR- Map I can not see my call --- why ?
First of all,I'm not familiar in detail with the Ultimate 3S.
But if there is an 'idle' check box in the TX setup dialog it must stay
unchecked,
otherwise the TX won't transmit.
As you obviously use WSPR SW for receiving *only* the idle box can be either
ckecked or unchecked **in WSPR SW**, as it doesn't matter for receiving.
If your TX has no connection to the internet no call sign of you will show
up in WSPR map or
activity list,but nevertheless your transmission should be decodable anyway.
So if you get no spots something is wrong with your HW setup.
1.3W RF into your antenna should suffice for at least a few spots.
73
Clemens
DL4RAJ
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of wensauer
Sent: Wednesday, February 18, 2015 3:54 PM
To: [email protected]
Subject: LF: Re: WSPR 630m
Hi Clemens,
please explain.
Background:
I am running Ultimate 3s WSPR stand alone ( 1.3 Watts) and
transmitting with
GPS accuracy.
With another RX (Flex 6300) at the same antenna monitoring the band.
Question: what have I to activate ?
Must be "Idle" marked or not ?
I am uploading spots
In WSPR- Map I can not see my call --- why ?
I guess, this evening more activity as during daytime.
Will be home later as 2100 MEZ
73
Uwe
-----Ursprüngliche Nachricht-----
From: Clemens Paul
Sent: Wednesday, February 18, 2015 3:04 PM
To: [email protected]
Subject: RE: LF: RE: Re: WSPR 630m
Hi Uwe,
the database says that YOU have spotted these five stations.
Unfortunately -according to a database search - it looks like
nobody has
spotted ("heard") you.
But let's try again this evening.
73
Clemens
DL4RAJ
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of wensauer
Sent: Wednesday, February 18, 2015 12:02 PM
To: [email protected]
Subject: Re: LF: RE: Re: WSPR 630m
Hi Clemens
This morning LA3EQ (0828H)
PA3BHT 1030h
Yesterday Evening
DK7FC
F1AFJ
DH5RAE
Beacon running
Must have more confience in all
Uwe
-----Ursprüngliche Nachricht-----
From: Clemens Paul
Sent: Wednesday, February 18, 2015 10:11 AM
To: [email protected]
Subject: LF: RE: Re: WSPR 630m
Hi Uwe,
which station(s) did spot (decode) you ?
73
Clemens
DL4RAJ
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of wensauer
Sent: Wednesday, February 18, 2015 12:47 AM
To: [email protected]
Subject: LF: Re: WSPR 630m
I got ist !
was heard and could hear
dh5rae,
f1atj
pa3bht
dk7fc
Xmitting with stand alone WSPR Ultimate 3s, Pwr 1,3 Watts into
top loaded
vertical 12m
Will improve setup soon
73
Uwe, dk1kq
-----Ursprüngliche Nachricht-----
From: Clemens Paul
Sent: Tuesday, February 17, 2015 11:54 PM
To: [email protected]
Subject: RE: LF: RE: Re: WSPR 630m
Thanks Thomas and Markus for
enlightening me about Uwe's stand alone TX
which does not make use of the WSPR SW and therefore
is not connected to the internet.
73
Clemens
DL4RAJ
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of
Tobias DG3LV
Sent: Tuesday, February 17, 2015 9:33 PM
To: [email protected]
Subject: Re: LF: RE: Re: WSPR 630m
Hi Clemens!
Why are you not showing up as active station on the WSPR page?
Because he ist not using a PC, but a stand-alone
WSPR-Transmitter Kit
without connection to the internet.
Uwe, if possible, pse change your Tx-QRG to 475,680 kc or
else, to come
free from the crowd of other stations on the 475.700. So that
we can see
you on the waterfall, and can differentiate your signal from others.
73 de dg3lv Tobias
Am 17.02.2015 um 21:13 schrieb Clemens Paul:
>The xmitting at 475,700 Kc
Ok ?
Uwe
Time should be ok. :-)
TX qrg too.
But again:Why are you not showing up as active station on
the WSPR page?
73
Clemens
DL4RAJ
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of wensauer
Sent: Tuesday, February 17, 2015 7:45 PM
To: [email protected]
Subject: Re: LF: RE: Re: WSPR 630m
Well,
my ULTIMATE 3S is synchroniced by GPS, so I assume, that time
is exact as
shown on display.
The xmitting at 475,700 Kc
Ok ?
Uwe
-----Ursprüngliche Nachricht-----
From: Clemens Paul
Sent: Tuesday, February 17, 2015 7:29 PM
To: [email protected]
Subject: LF: RE: Re: WSPR 630m
Hi Uwe,
why are you not showing up in the database (list of active
stations)?
I believe you will be copyable by someone.
Is your system time set accurately ?
73
Clemens
DL4RAJ
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf
Of wensauer
Sent: Tuesday, February 17, 2015 6:54 PM
To: [email protected]
Subject: LF: Re: WSPR 630m
Hi Clemens,
ja der TX läuft in 10 min Intervall.
Pwr ist an der Antenne 1,3 Watt.
Ant. 12m Tee, Dach ist 40m
Ich nehme einmal stark an, dass die Sendeleistung viel zu
klein ist, um
überhaupt gehört zu werden.
Auf der anderen Seite werden Signale aus USA gehört ?
Mal sehen wie das Signal später am Abend wird.
Hatte bereits normale cw- QSO, allerdings dann mit 50 Watt.
(Antennenstrom
900m Amp)
WSPR und "normales CW"sind bei mir 2 verschiedene Stn.
Für wspr baue ich gerade eine kleine PA mit 20 Watt
Würde mich freuen, wenn Du einmal mein Signal entdecken würdest.
How do you get the reports ?
73
Uwe
-----Ursprüngliche Nachricht-----
From: Clemens Paul
Sent: Tuesday, February 17, 2015 1:38 PM
To: [email protected]
Subject: RE: LF: RE: WSPR 630m
Hi Uwe,
are you transmitting at present?
I don't see your callsign in the WSPR activity list for MW.
Ant.2x155m Dipol;
RX Perseus
http://no.nonsense.ee/qthmap/?qth=JN68KJ79WJ
73
Clemens
DL4RAJ
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf
Of wensauer
Sent: Tuesday, February 17, 2015 12:45 PM
To: [email protected]
Subject: Re: LF: RE: WSPR 630m
Hi Rik and all
I´am running a WSPR 630m – all day long until midnight
I wonder if it can be heard before its running with more
power as now
73
Uwe, DK1KQ, JO43IU
From: Rik Strobbe <mailto:[email protected]>
Sent: Tuesday, February 17, 2015 10:53 AM
To: [email protected]
Subject: LF: RE: WSPR 630m
Hello Roelof,
I had half a dozen decodes of WG2XJM too.
But this is still peanuts compared to the 2009-2011 winters
where I could often copy the US stations as early as 22 UTC
and as late as 7 UTC.
Let's hope for another extended solar minimum in a few years.
73, Rik ON7YD - OR7T
________________________________
Van: [email protected]
[[email protected]] namens
[email protected] [[email protected]]
Verzonden: dinsdag 17 februari 2015 9:44
Aan: [email protected]
Onderwerp: LF: WSPR 630m
Hello all,
I am pleased to report excellent T/A reception on WSPR 630m:
2015-02-17 05:50 WG2XJM 0.475778 -21 +40 PA0RDT JO11tm 6131
2015-02-17 05:38 WG2XJM 0.475778 -23 +40 PA0RDT JO11tm 6131
2015-02-17 05:18 WG2XJM 0.475778 -17 +40 PA0RDT JO11tm 6131
2015-02-17 05:08 WG2XJM 0.475778 -19 +40 PA0RDT JO11tm 6131
2015-02-17 04:56 WG2XJM 0.475778 -27 +40 PA0RDT JO11tm 6131
2015-02-17 04:42 WG2XJM 0.475778 -21 +40 PA0RDT JO11tm 6131
2015-02-17 04:30 WG2XJM 0.475778 -19 +40 PA0RDT JO11tm 6131
2015-02-17 04:22 WG2XJM 0.475778 -26 +40 PA0RDT JO11tm 6131
2015-02-17 04:02 WG2XJM 0.475778 -28 +40 PA0RDT JO11tm 6131
2015-02-17 03:10 WG2XJM 0.475778 -23 +37 PA0RDT JO11tm 6131
2015-02-17 02:42 WG2XJM 0.475778 -30 +37 PA0RDT JO11tm 6131
2015-02-17 02:10 WG2XJM 0.475778 -28 +37 PA0RDT JO11tm 6131
2015-02-17 04:28 WG2XKA 0.475726 -28 +30 PA0RDT JO11tm 5546
2015-02-17 04:08 WG2XKA 0.475726 -29 +30 PA0RDT JO11tm 5546
2015-02-17 03:06 WG2XKA 0.475726 -25 +30 PA0RDT JO11tm 5546
2015-02-17 02:54 WG2XKA 0.475726 -25 +30 PA0RDT JO11tm 5546
2015-02-17 02:44 WG2XKA 0.475726 -25 +30 PA0RDT JO11tm 5546
2015-01-23 02:30 WG2XKA 0.475725 -26 +30 PA0RDT JO11tm 5546
Over the last week solar flux has dropped from 150 to 120 and
that seems to pay off. During the great LF conditions in
2009-2011 solar flux was often below 80.
Best regards,
Roelof
====================================================================
From: Roelof Bakker, pa0rdt
Location: Middelburg, Zealand SW Netherlands, 51 30 02 N,
03 36 02 E
Locator: JO11tm
Receiver: PERSEUS, USB mode, bandwidth 2400 Hz
Aerial: pa0rdt-mini-whip, 5 metre up in a hawthorn tree.
====================================================================
|
