Yes – Dial was one obstacle.
As cw enthusiast, was thinking in “CW”.
now I can decod myself and others.
If you receive yourself, wspr(x) will decode and
display your own callsign locally, but the spots won't appear in the wsprnet
database. You could circumvent this by modifying your callsign in the wsprx
setup dialog (eg. something like DK1KQ/2), but normally this is not very
BTW those unid dashes on 136.7 kHz actually looked
a bit like failed 33% wspr transmissions, except for wrong frequency, missing
modulation, and slightly short.
Sent: Wednesday, February 18, 2015 6:22 PM
Subject: Re: LF: Re: WSPR 630m
If you can decode other stations, you
must of course decode yourselfe as
well. If not, there is either a time- or
frequency shift. You will see
it in the WSPR-waterfall. As a test,
disconnect your RX antenna and look
on your own signal which should be
strong enough. It must appear to the
right time and frequency band.
you are transmitting 1500 Hz to high? I don't know the Ultimate 3s
there is the old problem with that "dial" frequency. "dial" is
474.200 kHz. Just try that to be sure...