|
Hi Domenico,
there is a prediction of high winds, so I
will probably have to retract the antenna before leaving to work tomorrow. But
there will surely be another chance soon.
On LF, I have simply used audio output from
WSQ2, set to 1500 Hz for 135.5 kHz superhet LO. However for MF I
don't have a linear transverter, so I will one day try the in-built interface
for the programmable FE5680A Rubidium source.
Best 73,
Markus (DF6NM)
Sent: Sunday, April 13, 2014 9:58 PM
Subject: Re: LF: WSQ 137.0 kHz
Hello W & M,
Good test. Compliments. I can't be in radio today but i hope that
Markus wants to repeate the test tomorrow so i can try to receive.
Markus how you are generating wsq signal ?
DDS ?
73 Domenico iz7slz
-------- Original message --------
From: Markus
Vester
Date:13/04/2014 21:29 (GMT+01:00)
To: [email protected]
Subject: Re: LF: WSQ 137.0 kHz
Wolf, thanks very much for the fine experiment and
the report - glad that you successfully picked up the transmission on
that attic dipole! So the mode can't be so bad ;-)
Grumpelmumpf - may you hear only pleasant
noises from your receiver, from now on ;-)
Best 73,
Markus
Sent: Sunday, April 13, 2014 9:17 PM
Subject: Re: LF: WSQ 137.0 kHz
The wobbly drifting QRM went away (receiving with the
local antenna, attic dipole) and now the automatic decoder also works aas it
should:
...
Signal not audible
here, in the 'Grumpelmumpf' (geek speak for unpleasant noise from a receiver,
hi).
73,
Wolf .
Am 13.04.2014 20:59, schrieb
Markus Vester:
Wolf,
continuing to send short "CQ"s every three or
five minutes or so. Yes I'd be interested to know if you can pick it
up...
Running your software version WSQ2 (April
12), worked UFB right from start!
73, Markus (DF6NM)
Sent: Sunday, April 13, 2014 8:46 PM
Subject: Re: LF: WSQ 137.0 kHz
Hi Markus,
On LF, 'receive-only' mode since
a couple of years, but it may be an interesting test.
I can switch the
remote RX to LF, but I think the IC706 is quite deaf on LF without the
variometer..
73,
Wolf .
Am 13.04.2014 19:59, schrieb
Markus Vester:
Just trying Wolf's latest version of WSQ
above 137.0 kHz - anyone for a QSO?
Markus (DF6NM)
|
