Re: LF: WSQ 137.0 kHz

["iz7slz.domenico" <iz7slz.domenico@gmail.com>]

Hello W & M,

Good test. Compliments.  I can't be in radio today but i hope that Markus wants to repeate the test tomorrow so i can try to receive.

Markus how you are generating wsq signal ? 

DDS ?

73 Domenico iz7slz

Sent from Samsung Mobile

-------- Original message --------
From: Markus Vester

Date:13/04/2014 21:29 (GMT+01:00)
To: rsgb_lf_group@blacksheep.org
Subject: Re: LF: WSQ 137.0 kHz

Wolf, thanks very much for the fine experiment and the report - glad that you successfully picked up the transmission on that attic dipole! So the mode can't be so bad ;-)

 

Grumpelmumpf - may you hear only pleasant noises from your receiver, from now on ;-)

 

Best 73,

Markus

From: wolf_dl4yhf

Sent: Sunday, April 13, 2014 9:17 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: WSQ 137.0 kHz

The wobbly drifting QRM went away (receiving with the local antenna, attic dipole) and now the automatic decoder also works aas it should:

...

Signal not audible here, in the 'Grumpelmumpf' (geek speak for unpleasant noise from a receiver, hi).

73,
  Wolf .



Am 13.04.2014 20:59, schrieb Markus Vester:

Wolf,

 

continuing to send short "CQ"s every three or five minutes or so. Yes I'd be interested to know if you can pick it up...

 

Running your software version WSQ2 (April 12), worked UFB right from start!

 

73, Markus (DF6NM)

 

 

From: wolf_dl4yhf

Sent: Sunday, April 13, 2014 8:46 PM

To: rsgb_lf_group@blacksheep.org

Subject: Re: LF: WSQ 137.0 kHz

Hi Markus,

On LF, 'receive-only' mode since a couple of years, but it may be an interesting test.

I can switch the remote RX to LF, but I think the IC706 is quite deaf on LF without the variometer..

73,
  Wolf .

Am 13.04.2014 19:59, schrieb Markus Vester:

Just trying Wolf's latest version of WSQ above 137.0 kHz - anyone for a QSO?

 

Markus (DF6NM)