Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: WSQ2 new version uploaded

To: [email protected]
Subject: Re: LF: WSQ2 new version uploaded
From: wolf_dl4yhf <[email protected]>
Date: Sun, 09 Mar 2014 21:19:16 +0100
Authentication-results: mx.google.com; spf=neutral (google.com: 195.171.43.25 is neither permitted nor denied by best guess record for domain of [email protected]) smtp.mail=[email protected]
Delivered-to: [email protected]
In-reply-to: <[email protected]>
References: <006b01cf3969$43a83480$caf89d80$@de> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
User-agent: Mozilla/5.0 (Windows NT 5.1; rv:17.0) Gecko/20130620 Thunderbird/17.0.7
Hi Michel,

Ok, I just checked (even if I don't have a synthesizer to test) and indeed there was something wrong with the commands strings loaded from file "setup.txt". Hopefully fixed now. I have uploaded a slightly modified version a few minutes ago.

Not really sure about when to open the serial port (immediately after starting WSQ ?) and which serial port number to use.. maybe you can test and suggest how to do this properly :

There's one COM port number specified in "setup.txt", and another one selectable through the PTT menu - but the latter (user selection) isn't saved anywhere so far. The setup file is only read, but never written by WSQ.

(maybe this would be a solution: If the operator selects a COM port from the PTT menu, the com port number from "setup.txt" should be ignored)

73,
  Wolf .


Am 09.03.2014 19:17, schrieb Michel Brunel:
Hi Wolf,

Last version (march 6th)  has a problem with the synthesizer.
Only the first tone is output to the serial COM port and the Synthesizer command  displays no data anymore.
btw the "Open synthesizer file" menu does nothing with the selected file (File Open Dialog  is ok)

73, 

Michel - f5wk


Le vendredi 7 mars 2014 à 00:09:28, wolf_dl4yhf écrivait :

> .. now with the edit field for the squelch level working properly again.
> I had messed it up by setting the style to "numeric input" but realized 
> too late that "numeric input" means 'digits only', so the box rejected 
> the minus sign. So only non-negative SNR as squelch level. I had set the 
> squelch level (which is saved between sessions in an ini file) before 
> that modification.  Oops...

> Also the waterfall zooming (via mousewheel) and panning (grab it with 
> left mouse button) is working now.
> Contrast- and brighness controls need some more work; they will possibly 
> be replaced by min- and max displayed magnitude range (measured in dBfs, 
> with AGC turned off this allows to check the absolute input levels. AGC 
> masks poorly adjusted audio levels... not good)

> Rik and Eberhard  : Thanks for the suggestions. The automatic carriage 
> return isn't implemented yet, but that will follow very soon.

> 73,
>    Wolf DL4YHF .

> http://www.qsl.net/dl4yhf/WSQ/





-- 

<Prev in Thread] Current Thread [Next in Thread>