Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: LF: WG2XRS/4 [WG4XRS for short] will start at 2200 with WSPR 15... "

To: <[email protected]>
Subject: Re: LF: WG2XRS/4 [WG4XRS for short] will start at 2200 with WSPR 15... "Band" selection?
From: "Graham" <[email protected]>
Date: Thu, 12 Dec 2013 21:59:30 -0000
Authentication-results: mx.google.com; spf=neutral (google.com: 195.171.43.25 is neither permitted nor denied by best guess record for domain of [email protected]) smtp.mail=[email protected]
Delivered-to: [email protected]
Importance: Normal
In-reply-to: <5C6D6BC04A584E798275EA32CAB71912@White>
References: <[email protected]>,<FE3A7DFD6107452292593AFA159E9EC7@White> <[email protected]> <5C6D6BC04A584E798275EA32CAB71912@White>
Reply-to: [email protected]
Sender: [email protected]
Real data  modes  like noise  : )

Sent: Thursday, December 12, 2013 9:48 PM
Subject: Re: LF: WG2XRS/4 [WG4XRS for short] will start at 2200 with WSPR 15... "Band" selection?

Thanks Bob, looking out now...
 
Unfortunately 74613 Hz looks a bit noisier here than 614: http://dl.dropboxusercontent.com/u/26404526/df6nm_74kHz.jpg
 
73, Markus

From: Bob Raide
Sent: Thursday, December 12, 2013 10:11 PM
Subject: RE: LF: WG2XRS/4 [WG4XRS for short] will start at 2200 with WSPR 15... "Band" selection?

Markus
I would set to other and will report to LF
 

From: [email protected]
To: [email protected]
Date: Thu, 12 Dec 2013 22:05:38 +0100
Subject: Re: LF: WG2XRS/4 [WG4XRS for short] will start at 2200 with WSPR 15... "Band" selection?

.. trying to set up WSPR-X v0.8 r3058. I have set "Dial" to 0.073 MHz, should I then select "other" in the "Band" box, or rather "2200 m" for uploads to work?
 
Best 73, Markus

From: Bob Raide
Sent: Thursday, December 12, 2013 8:46 PM
Subject: LF: WG2XRS/4 [WG4XRS for short] will start at 2200 with WSPR 15...

Will stay on till at least 0600 if decodes continue.  Dial freq is 73 kHz and 74.613 TX freq, moving down one hertz as that seems clearer as per Hartmut Wolff.  Have fun and GL, Bob
<Prev in Thread] Current Thread [Next in Thread>