Re: LF: A short VLF experiment at DK7FC

[Stefan Schäfer <Stefan.Schaefer@iup.uni-heidelberg.de>]

Hi Jim,

My ERP was in the range of 500 uW.

I suggest to monitor the signal on 11904.7619 Hz, just to check that 
your system is stable over a longer time. This test is very useful. But 
you'll need the ultra stable reference signal because a PC clock drifts 
to much! If you do not have a reference signal, some tests using NAA on 
24 kHz for the reference (in SpecLab sample rate detector) may work more 
or less on your side. All this can be tested by tracking the Alpha signal.
73, Stefan/DK7FC


Am 16.12.2013 11:20, schrieb hvanesce:
> Stefan,
>
> I did not capture raw A/D data during your 8970.005 transmission yesterday, but 
> I have figured out how to do so and will be ready next time. Based on SNR 
> yesterday at Todmorden and virtually no cultural noise here, it might be 
> possible to extract your signal here with some post-processing of natural 
> noise. Do you have a guess or an estimate of ERP for yesterday's test?
>
> 73,
>
> Jim AA5BW
>
> -----Original Message-----
> From: owner-rsgb_lf_group@blacksheep.org [mailto:owner-rsgb_lf_group@blacksheep.org] 
> On Behalf Of Stefan Schäfer
> Sent: Sunday, December 15, 2013 3:29 PM
> To: rsgb_lf_group@blacksheep.org
> Subject: Re: LF: A short VLF experiment at DK7FC
>
> Hi Laurence,
>
> Am 15.12.2013 22:27, schrieb Laurence KL7 L:
>    
> > Is this the same coil as used for the kites stefan?
> >
> >      
> Yes, it is.
>
> 73, Stefan
>
>
>