Are there other EU countries (apart from the British Isles) granting MF access to the amateur service so fast ?
We in France still did not hear even the smallest whisper from our tutelage administration. Or maybe am I not well informed.
73
Ben
> Message du 07/06/12 13:16 > De : "mal hamilton" > A : [email protected] > Copie à : > Objet : Re: LF: VX9MRC 504.1 kHz > > Stefan > I have had QSO's on 500 Khz across the Atlantic also EI0CF many times during > the winter months. > I work QSO mode only and no beacons. > I have also had some QSO'S with Russian stations, they call me on 7033 and I > reply on 502 normally although I have vfo control. > I work on CW and if condx get difficult I work QRS3 but not SLOWER > When the new band starts the old 500 khz band will end next January > Mal/g3kev > > > ----- Original Message ----- > From: "Stefan Schäfer" > To: > Sent: Thursday, June 07, 2012 10:45 AM > Subject: Re: LF: VX9MRC 504.1 kHz > > > > Hi Joe, LF, > > > > Yes, we're here of course :-) > > Unfortunately i still cannot receive on MF. My RX is home made and vy > > narrow band. But i'm going to have a suitable RX in some time. > > BTW, what about all the 500 kHz allocations. What happens to them when > > the new 475 kHz band becomes permitted? Will you have an extended > > frequency range then or will you have to QSY? > > And what about the chances of this band? How easy is a TA detection? > > Would it be possible to have a CW QSO over that 4400 km distance? > > It would be possible for me to radiate 1 kW ERP on that band, however > > with a 1W (EIRP of course) limitation, this may become a problem... > > > > 73, Stefan/DK7FC > > > > > > Am 07.06.2012 02:15, schrieb [email protected]: > > > > > > Hopefully someone will read this on Baa Baa.... > > > > > > The beacon is running on a new frequency with a CW ID and > > > a 10 second carrier. Reports most welcomed. > > > > > > 73 > > > Joe VO1NA > > > > > > This electronic communication is governed by the terms and conditions at > > > > http://www.mun.ca/cc/policies/electronic_communications_disclaimer_2012.php > > > > > > > >
|