Return to KLUBNL.PL main page

rsgb_lf_group
[Top] [All Lists]

Re: VLF: New test from Heidelberg on 8970.005, on air

To: <[email protected]>
Subject: Re: VLF: New test from Heidelberg on 8970.005, on air
From: "mal hamilton" <[email protected]>
Date: Sat, 17 Mar 2012 14:13:51 -0000
References: <[email protected]> <[email protected]>
Reply-to: [email protected]
Sender: [email protected]
Pity you missed the oppertunity to have a xband VLF/LF QSO
de g3kev

----- Original Message -----
From: "Stefan Schäfer" <[email protected]>
To: <[email protected]>
Sent: Saturday, March 17, 2012 1:39 PM
Subject: Re: VLF: New test from Heidelberg on 8970.005, on air


VLF,

Transmission stopped arround 13:25 UTC due to upcoming strong winds and
rain coming closer from 200 km distance SW now.
I hope to go on soon.
Thanks to all monitoring stations! Haven't expected that such good
readability would be possible in this time of the year (remembering the
15th March 2010 ;-) ).

73, CU, Stefan/DK7FC

PS: LF,  DK2TX is testing in QRSS-60 at 137.776 kHz,
http://www.iup.uni-heidelberg.de/schaefer_vlf/DK7FC_LF_DX_Grabber.html
Never seen him before.



Am 17.03.2012 01:14, schrieb Stefan Schäfer:
> VLF,
>
> Now the TX is running. No HV problems this time. I'm running 500W. The
> coil current is close to 1A so the antenna current may be 850mA, 3 dB
> more than in november 2011.
> The frequency is 8970.0050 Hz, "locked" to GPS within SpecLab.
> I'm going to transmit a loooooooooong carrier until 9 UTC or so. Then
> i'll play arround a bit, depending on the results of local grabbers
> and activity.
>
> Reports apprechiated.
>
> I thought about giving WOLF10 (or 5) a try, as an exception. DF6NM
> would be the intended goal but everyone is invited to receive. If i
> will try WOLF then i have to use an unlocked frequency, i.e. just
> using the normal WOLF gui program. Anyway, at least no glitches on
> that 10 year old PC, hopefully.
>
> 73, GL, Stefan/DK7FC
>
> PS: Odd, still 12 °C outside at 1 AM local...
>




<Prev in Thread] Current Thread [Next in Thread>